I have an ASA 5520 setup with both VPN clients and l2l. I have a DMZ setup with static NAT on outside and Inside. Inside clients can reach the DMZ through an internal LAN IP address that has a static map and external users can hit the DMZ via an external address. I need to enable VPN users to be able to access the DMZ through the internal LAN address and I also need internal/VPN users to access the DMZ through its external address.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...