We have a customer that has a ASA 5510 and a remote site with a Cisco RVS4000 Router. We can get the tunnel up and passing traffic if we just do subnet to subnet interesting traffic, but the customer wants to tunnel all traffic from the RVS4000 subnet to the ASA5510. The problem is it doesn't appear that you can configure the RVS4000 (granted I haven't dealt with the RVS4000 very much) to tunnel all traffic. If we put 0.0.0.0 subnet 0.0.0.0 on the RVS4000 for the remote interesting traffic, it complains that the local network is in the same subnet as the remote side. Has or does anybody know a way around this on the RVS4000.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...