ASA Remote Access VPN established, but no LAN connectivity
Recently we have successfully configured and established Remote access VPN to our ASA. But the problem is we are not able to access any of the LAN devices. From the ASDM log the packets are denied like below
2 May 09 2012 23:25:42 10.100.1.4 138 10.100.1.255 138 Deny inbound UDP from 10.100.1.4/138 to 10.100.1.255/138 on interface inside
DHCP pool created for Remote Access VPN is 10.100.1.0/24 and inside range using is 10.1.1.0/24. Connected machine is getting ip from the pool after connection, but no ping or any other access cannot be established to the inside network range even after successful connection.
Any suggessions regarding this are highly appreciable.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...