Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA SSL syslog 113019 problem

Hi,

I have been testing SSL VPN on ASA 8.2.1.

About 5 ~ 10 minutes after SSL connection is created, I get the following error.

Error ID:113019 Group = DefaultWEBVPNGroup, Username = testuser, IP = 114.xx.xx.xx, Session disconnected. Session Type: SSL, Duration: 0h:17m:27s, Bytes xmt: 778134, Bytes rcv: 173139, Reason: Client type not supported

Does anyone know what "Client type not supported" means?

Any input is appreciated.

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ASA SSL syslog 113019 problem

Under Secure Desktop Manager/Default/Cache Cleaner, check to see if you have "Launch cleanup upon timeout based on inactivity" checked.  If so, 
what is the timeout?


Could you try to increase or disable the idle timeout value set in CSD cache cleaner and see if it helps.


-heather

2 REPLIES
Cisco Employee

Re: ASA SSL syslog 113019 problem

Under Secure Desktop Manager/Default/Cache Cleaner, check to see if you have "Launch cleanup upon timeout based on inactivity" checked.  If so, 
what is the timeout?


Could you try to increase or disable the idle timeout value set in CSD cache cleaner and see if it helps.


-heather

New Member

Re: ASA SSL syslog 113019 problem

Thanks for the reply.

Your answer is exactly what I was looking for.

Thank you very much.

Taro

2499
Views
0
Helpful
2
Replies