Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA -SSM AIP 10 FIREWALL IMPLEMENTATION

Hi,

We are planning to implemnet ASA in our DR netwrok.Our network architecture router3845 and Switch3745 is connected to

the network.

In present scenario as follows

1.One internet is connected to router3845

2.Site to site VPN is connected between two site

3.one of LAN network 10.x.x.x is NATing done.

Implementation

Router3845 -ASA ssm AIP 10 -SWITCH3745

1.One mpls link to be connected to the router3845 ---once Data center is not able to reach ,through this mpls link user will reach DR site.

2.one Replication link is used for synchrous for some of the server.From this link only replication traffic should pass through.But it is also same VLAN(Server vlan)

Using the access list,can i achive this---to be creat in ASA or Switch ?

Can i create the All VLAN in the Switch or ASA ?

How can i pass the lan traffic through the ASA Firewall then router?

How can i allow the mpls traffic throug the router and then ASA AIP10

Pl give idea or link or input.

1 REPLY
New Member

Re: ASA -SSM AIP 10 FIREWALL IMPLEMENTATION

Pl give idea or link or input.

205
Views
0
Helpful
1
Replies