Scenario:
-ASA5505 v7.2(3) at remote site (public IP)
-VPN3015 v4.7.2
The site-to-site tunnel comes up. When I do 'show crypto ipsec sa' I can see traffic being transmitted FROM the ASA and received by the VPN3015. The problem is I see no traffic being transmitted by the VPN3015 and no traffic being received by the ASA.
I have a static route in the VPN3015 pointing to the network behind it. Also, the devices behind the VPN3015 have routes back to the remote site via the VPN3015.
This is a standard site-to-site tunnel in tunnel mode. Nothing special. No NAT, no fancy filters, etc.
I can't seem to figure this out. It would be awesome if someone had an idea for me.
Thanks!