I am in the process of configuring the IPSec remote access vpn on the ASA (ver 7.2). I would like the VPN clients to obtaing the IP address from our internal DHCP server (Microsoft AD environment). Is this possible and if it is can someone direct me to a config sample page (link).
It is possible, I have not tested this as I use VPN IP pool instead, but based on this documentyou can assign up to 10 dhcp servers for the VPN clients to be assigned IP addresses by windows AD DHCP or any other DHCP server.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...