I have configured AnyConnect on my two ASA 5540 but now , we have decided to use VPN Loadbalancing on it so we can distribute VPN load. I am configureing everything in the lab to test how is it working.
Here is my topology setup:
ASA1 OUTSIDE ---> 10.10.10.1/24
ASA2 OUTSIDE ---> 10.10.10.2/24
SW1 VLAN int ---> 10.10.10.3/24
Default GW for both ASA is 10.10.10.3
ASA1 INSIDE ---> 192.168.1.1/24
ASA2 INSIDE ---> 192.168.1.2/24
SW2 VLAN int ---> 192.168.1.3/24
Inside route on both ASA to 192.168.1.3
now my VPN load balancing config on both ASA:
cluster key abc
cluster ip address 10.10.10.3
Now, problem is that I need to configure certificate on SW1 which is my virtual IP on ASA for VPN loadbalancing. I read some document and it says I need to configure one Unified Client Certificate (UCC). I am not sure how can I test this scenario in my lab.
How do I create dummy certificate?
Can anyone suggest me what to do here in my scenario! Your quick help with be much appreciated.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...