ASA VPN with Windows 2008 NPS (Radius) authentication issue
I need to permit a user to access through a remote access vpn and a remote access web ssl vpn. Both vpn are configured on Cisco ASA 5520 and network policy also on 2008 NPS. If the single user on 2008 NPS is assigned to only one vpn group everything works fine. If the single user is assigned to both vpn groups only the first vpn works, not the second one. Is it possible to make a user accessing through more then one vpn ?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...