After a hardware issue we have to change the ASA to a new one but the same Model. The old flashcard works without a Problem. But the VPN Conection work not correct. I change the Base LIcens to Security Plus but without any chnage in the Problem. Can some one say me where the Problem could be.
Last time we have this Problem this was an IP-address conflict with the Small Business Server. The DHCP Pool from the ASA was in trouble with the DHCP Pool of the SBS. We exclude the leasing range from 192.168.10.120 - 192.168.10.149 in the DHCP and give the VPN this Range. From that Day it works fine. Now the same issue with my Boss IPhone, (BIG TOY !! nothing more BB is much better:-) ) but the last solution not work.
2.3 Over a direct IP-Address in the VPN User Profile.
Here was the Problem. I gave the Tunnelgroup the DHCP Server and the Range. But on the DHCP Server this Range was excluded. So the ASA give every Client a Address of the given Pool. But this Pool was blocked on the DHCP - Server. Due to Luck sometimes the Client had a connection sometimes not.
1. open the IP- Address Pool on the DHCP Server
2. no entry of DHCP - Server in the Tunnelgroup
3. use the Address Pool of the ASA
I Think the ASA leased a Address from the Server in the given Pool. The Server has a Rule that not allowed this Range and so the problem occurred.
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in HA
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationCo...
I am currently unable to specify "crypto keyring" command when configuring VPN connection on my cisco 2901 router.
The following licenses have been activated on my router :