ASA5510 active/standby failover.
we have two ASA 5510.
appliance 1
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Active/Standby
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : 250
WebVPN Peers : 50
appliance 2
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Active/Standby
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : 250
WebVPN Peers : 2
my questions is will the ASA5510 support active standby without upgrading the SSL or WEBVPN license on the second device to 50 ?
I think as long as both ASA5510 have security plus license the failover should work.
Or i have to upgrade the second appliance ssl licenses to 50. Can someone point me to a config what I need to do .
Thanks
Nilesh