Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ASA5510 failover config

ASA5510 active/standby failover.

we have two ASA 5510.

appliance 1

Maximum Physical Interfaces : Unlimited

Maximum VLANs : 25

Inside Hosts : Unlimited

Failover : Active/Standby

VPN-DES : Enabled

VPN-3DES-AES : Enabled

Security Contexts : 0

GTP/GPRS : Disabled

VPN Peers : 250

WebVPN Peers : 50

appliance 2

Maximum Physical Interfaces : Unlimited

Maximum VLANs : 25

Inside Hosts : Unlimited

Failover : Active/Standby

VPN-DES : Enabled

VPN-3DES-AES : Enabled

Security Contexts : 0

GTP/GPRS : Disabled

VPN Peers : 250

WebVPN Peers : 2

my questions is will the ASA5510 support active standby without upgrading the SSL or WEBVPN license on the second device to 50 ?

I think as long as both ASA5510 have security plus license the failover should work.

Or i have to upgrade the second appliance ssl licenses to 50. Can someone point me to a config what I need to do .

Thanks

Nilesh

1 REPLY
Community Member

Re: ASA5510 failover config

You will have to make sure both ASAs have all of the same features. That includes the WebVPN licenses as well

--Gavin Budd

171
Views
0
Helpful
1
Replies
CreatePlease to create content