On my ASA5510 I have from link 0 to 3 (on the back of the device) these are 4 hardware ethernet ports and one MGMNT (management) port. In the ASDM I see e0/0,e0/1,e0/2 and Management0/0. I dont see e0/3. It is impossible Management0/0 to be e0/3 because I have hardware MGNMT port on the back of the device.
My question is: Is it a question of license or a bug in the ASA.bin?
This model comes with 5 FE ports, in based license you will only have three, in order to see or unlock the rest inclduing management port to be a regular routed port you will need security plus license, what license do you have?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...