Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA5510 VPN Setup

Greetings,

Anyconnect clients cannot reach inside networks beyond the inside interface.

Used wizard to create anyconnect ssl vpn.  ASA setup:

Outside 69.x.x.x, Inside 128.10.10.1 (I know...this is not my box)  ASA connects to core switch via an access port on vlan 666.  128.10.10.2 is an SVI for VLAN666.  All other networks on the switch are 10.x.x.x

VPNUser can receive an address from the pool - 10.200.200.x with a DG of 10.200.200.1.  While connected, user can ping the 128.10.10.1 Inside interface, but nothing else beyond.

I suspect I am missing something in routing, but can't seem to land on the right static route combinations. Thank you.

1 REPLY

Have you advertised the 10

Have you advertised the 10.200.200.0/24 network into your network? Have you also checked the split-tunnel setup to see if you only tunneled specific networks instead of all?

38
Views
0
Helpful
1
Replies