Automatic tunnel group selection through radius on Cisco ASA
Hi all. I try to let Cisco ASA automatic select a tunnel group for users, after user input username and password. I try to do this without user selection a connection profile on login page. Authentication on ASA<>ACS 5.3<>MS AD. How i can will do this? Radius attribute class=group_policy don't work.
Re: Automatic tunnel group selection through radius on Cisco ASA
You can't select a tunnel-group from RADIUS. But you can assign the right group-policy for your user with the class-attribute. For that you need to have different group-policies configured on your ASA. Alternatively instead of assigning the group-policy you can assign the individual parameters like IP, VPN-filter and so on.
Sent from Cisco Technical Support iPad App
-- Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...