Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Band Width limit in VPN

 

Hello All,

I have 6 Mbps link. I need to setup 2 Mbps for one S2S vpn and 4 Mbps for another S2S vpn. I know site2site vpn configuration but don't know the setting bandwidth limit. Can anyone let me know how to do or any link.

 

Thanks,

Krishna

3 REPLIES
New Member

Hi Krishna, Do you known how

Hi Krishna,

 

Do you known how to setup a VTI vpn?

http://www.cisco.com/en/US/technologies/tk583/tk372/technologies_white_paper0900aecd8029d629_ps6635_Products_White_Paper.html

 

Then you can implement QoS (shaping or policing) on that tunnels interfaces.

 

Here an example for shaping (configure on both sides):

policy-map T1

class class-default
    shape average 3984588 39845     // 3984588 = 4*1024*1024*.95 for 4 Mbps link

interface tunnel 1

service-policy output T1

 

Hope this can help!

 

Regards,

 

Pedro Lereno

New Member

Hi Pedro,Thank you for the

Hi Pedro,

Thank you for the reply. I have seen the link you have provided and it is like gre over ipsec but no crypto maps. I have learned  new topic today.  The document is good and thanks again.

Regards,

Krishna

 

 

VIP Green

Check out this link....is

Check out this link....is this what you are after?

http://www.cisco.com/c/en/us/td/docs/ios/12_2/qos/configuration/guide/fqos_c/qcfvpn.html

--

Please remember to select a correct answer and rate helpful posts

-- Please remember to rate and select a correct answer
51
Views
0
Helpful
3
Replies