VPN

Hi,I am trying to setup site to site VPN and I am not able to establish connection. Could anyone see what is wrong with the code below? Thanks in advance.On ASA 5525x 8.6================ nat (inside,outside) source static inside-subnet-source inside-...

Hi,The aim is to set up site to site VPN with a vendor. That is not an issue. The question that I am not familiar is setting up encryption domain in this particular scenario.The vendor has to manage our device that has private IP address (10.x) but f...

All,I have set up a Site to Site VPN tunnel. In this tunnel, the end users traffic of interest is already a subnet we use on our network, 192.168.20.0/24.  What I would like to do is set up a PAT on our tunnel will be NATTED.  Our appliance locally w...

dear support community , Am using windows 8.1 pro and cisco vpn client version 5.0.0.7.0410.my issue is that am able to connect to the VPN succesfully but  when connected i cant ping nodes inside the VPNwhereas when i do the same test with a windows ...

This is driving me nuts.  I have Anyconnect working perfectly on an 1811 until I add some basic zone firewall commands.  After adding the firewall I can still connect but can only access the router and none of the other internal devices.To simplify i...

Hello, I am sure this is something very simple.I am connecting a 2621 router with an 867 router via an IPSEC VPN connection. Diagram attached.n.b. the 867 router has a Dialer interface set up but I am not using this for this VPN test, rather I am try...

HI All,Anyconnect client ver3.1.05, windows 7Windows machine, currently behind the WSA web proxy that requires web authentication using AD credentials.When trying to established a VPN connection: It popups error msg "The service provider in your curr...

Hello Experts!We have an ASA (8.25) configured for L2TP and the primary clients are OSX with native client. Clients are able to connect without issue and reach our main network (A), but are unable to reach a separate network (B) on the inside of the ...

Hi all,I have some systems deployed with ASA 5505 devices that were previously running 8.3.(1) and was monitoring the tunnels using cacti.  I upgraded the devices to 9.1(4) to take advantage of the suite B features.  The tunnels are not operating as ...

Hi Experts,I've got an interesting setup to deploy that I've been struggling to implement yet.First the picture, then the words follow:Specifications / Limitations:1. Head Office: ASA-5512 running 8.4 and corporate data centre with DHCP central servi...

I have a Cisco 1921 that connects to an ASA 5540 through EZVPNThe 1921 connects to the Internet via Verizon using a cellular HWIC. The connection works fine, and the tunnel comes up. If I do a show crypto ipsec sa, I see the local and remote networks...

Mib object could not import