Hi,I'm having a problem and need some advice. I am normally a software developer, however with recent staff changes at my company I am now the sole IT person, so I'm having to branch into a lot of unknown areas and really need some help.We have t...
Hello,In current situation I have this. Note this is a labsetup so anything is fair game.ASA 5540 Inside Int: 10.10.1.2543750(acting as router, it's default route is ASA Inside int) : 10.10.1.253On the 3750 I have a VLAN90 which has a gateway on the ...
I have a problem configuring a site to site VPN between two sites, one is an ASA5540 with version 8.2, the other is an ASA5545X with version 9.0I'll try to include the relevant portions of the configs here... the tunnel will not establish and nothing...
Dears,I went to istall the Cisco VPN Client SW. I used "vpnclient-winx64-msi-5.0.07.0440-k9" installator. But the installation on my laptoop finished with the Error 1722.Here is fagment from the log file:MSI (s) (74:B0) [12:07:23:006]: Product: Ci...
I'm trying to configure ipsec ,i followed a cisco tutorial and configure ths two routers : (192.168.1.1)loopback-ROUTERA-f0/0(80.80.80.1)------------(80.80.80.2)f0/0-ROUTERB-loopback(192.168.2.1)i can ping from one router to the other,but when i en...
Hi,I have configured ISP failover on ASA 5510 its working fine, when Primary ISP fails, Traffic is shifting to secondary ISP. On the ASA i have configured Site to Site VPN its working fine on primary ISP, Can any body suggest me when failover happens...
In studying and testing SSL VPN on an ASA I have the network as shown in the attached diagram. The configuration is based on an ASA with 8.3 but our ASA is 8.2 and at this time I'm not familiar with the new NAT configuration and commands in 8.3 or la...
It was my understanding that the goal of the Wizard was to leave you with a working Remote Access VPN. I have tried both the IPsec and the AnyConnect vpn with no success accessing internal objects after I connect. I suspect something is missing Nat r...
I'm working on a new DMVPN configuration with one 3745 at the hub site and a 1941 the spoke. I have internet through gsm for the primary line at the spoke and a dsl line for backup on spoke.I have one tunnel interfaces on both the hub and the spoke....
Hello,I have problem on cisco vpn client connects normaly but user can't t access anythingthe problem appear only on this laptop but when the same acccess the vpn via any other laptop it is working without any problems i checked eve...
Hi,We have a standard L2L VPN setup. We had an issue with IP traffic only passing in 1 direction. The Crypto map ACL's were setup as belowSITE Aaccess-list XXX-L2L-CRYPTOMAP extended permit ip 192.168.118.0 255.255.255.0 172.16.246.0 255.255.255.0SI...
Hi all,I need some help from someone who has experience with configuring VPN on ASA over 2Wire router setup as dmzplus.Topology:ASA 5505 ---- 2Wire (dmzplus) -------------- ( cloud ) -------------- 2Wire (dmzplus) ---- ASA 5505 BT is the ISP on both ...
Hi,ITS ASA 8.4 VERSIONi am configuring clientless ssl vpn using local authentication. I can achieve it. But client is askingOne Main Page Login GROUP Dropdown list should be displayed Like HR, MarketingWhen we Select HR or Marketing Policies related...
Device: C819HG+7-K9To enable GPS output via the Line we followed this procedurehttp://www.cisco.com/en/US/docs/routers/access/800/819/software/configuration/Guide/3routconf.html#wp1182766This successfully dumps the NMEA5 GPS information via telnet ...
