VPN

Hi GuysI have a quick question.I have a VPN filter applied to my VPN group policy on network 192.16.1.0/24I would like a management server sitting on 10.0.0.0/23 network to VNC and have specified access to users who are VPNed.In the VPN ACL I allowed...

Hello all. I have a problem that I could use some fresh eyes on.Today we physically moved an ASA 5510 across town and took another location off of fiber and onto a VPN with the asa 5510, via a brand new 5505. The VPN seems to be up however no local t...

I used the ssl vpn wizard to create an SSL vpn with a new group policy called sslvvpnpolicy. This worked fine, but while testing, it wouldn't connect unless ClientSSL is enabled on the dftgrppolicy. Even if I enable clientSSL on the new group policy,...

Hello all,   I install and connect the first time without a problem, however once I disconnect I am unable to reconnect, I am running windows XP. I have tried it on two seperate XP machines, one is a new computer and new windows install. the log is b...

An interesting problem that I have come across folks.S2S between and CP and a CISCO 2600 router.The tunnel comes up like a charm, but when interesting traffic hits the cisco router, i get the below error:%CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac veri...

Hello, I'm in desperate need of help. I live in the country and the only Internet we have available to us is via Satellite. I work from home and I can connect to work with Cisco VPN just fine, the problem is that it is very slow and if the weather is...

How do I check size of the state table? show conn or show local-host, does not give me the size of the table, though.appreciate any insight.Thanks,Anand

Greetings!My user has an HP m3035 MFP, running Win7 on his laptop. When connected to Cisco Anyconnect (and with Local LAN Access enabled), he is able to print from that MFP, but the scanning function is not recognized.He is able to scan just fine whn...

Hello,I want to use Cisco VPN Client to VPN to my SA520 to manage a UC320W. I can establish a VPN connection to the SA and ping both the SA and a switch that I have on the network, but I cannot ping my UC. I've set up firewall rules to allow ANY-ANY ...

Hi,I am currently trying to setup DVTI VPN in GNS3. I am using loopback interfaces for the LAN interface. I can get the tunnel and virtual access interfaces to come up and can ping from the outside address but not from the LAN address on the spoke ro...

I have a RVS4000 with client VPNs setup and have created all 5 users......trouble I run into is that when one of the users attempts to connect to the VPN from a second device (ie the sixth device to connect to the VPN), the connection does not establ...