Hi,Is there any conversion tools that I can use to convert from VPN Concentrator to ASA? Thanks in advance.
Hi,Is there any conversion tools that I can use to convert from VPN Concentrator to ASA? Thanks in advance.
Hi,I am trying to setup a VPN with AnyConnect on my ASA5510 and it works fine. I have setup an AAA server group for my Active Directory with the "NT Domain" protocol". Right now, every user is able to connect with their Active Directory credentials...
Group - With in the AnyConnect profile, OGS can be enabled and deemed user controlable, however documentation speaks to an OGS list...where is this list defined? Is it the Server list or the backup server list? And if I have the server list defined,...
I need to create a bookmark that does the following:Connect to a Windows server with an RDP sessionProvide a user ID & password (not the user ID authenticated with my Acitive Directory when the user connected)Open a program on the serverPass a parama...
Hi all,I want to configure Dynamic Access Policies for Remote Access VPN users on our ASA. Currently IPSec VPN and SSL (Clientless and AnyConnect) users are authenticated using two different RADIUS servers. RADIUS server 1 will authenticate IPSec use...
Hi allI have an issue, we have an ASA, this authenticates using LDAP to my local domain controller, this DC has users on it, we then ahev another DC on another site which is in a different domain.however the users on both domains share the same Group...
Hi all,after updating the ASR1004 Router to ROMMON 15.2(1r)S and IOS-XE 03.06.02.S, i get the following error messages:%IOSXE-3-PLATFORM: F0: cpp_cp: QFP:0.0 Thread:101 TS:00000059590688361391 %IPSEC-3-HMAC_ERROR: IPSec SA receives HMAC error, DP Han...
Hi,I have been trying to configure Cisco1941/K9 as Easy VPN Server through CiscoCP.The tunnel comes up but I cannot pass any traffic to the secure LAN (GigEth 0/1). When the tunnel comes up, I can ping the Loopback interface and the GigEth 0/1 interf...
Can anyone help in setting up SSL VPN in an IPv6 environment.Thanks in advance.
Hi,Previously, I was able to configure our Easy VPN Server with local authentication.But now, I am trying to use LDAP authentication to match with our policies.Can anybody help me please to check the config and tell me what is wrong with it?My router...
Dear Guys,I've configuared a easy VPN between cisco 3845 and cisco 871 router, 3845 is VPN Server.I am facing problem at client router ie.whenever The public IP address is changed the VPN is disconnectig.Regards,Jai Kishore.
I am configuring a vpn ipsec tunnel with cisco isr 2921 router and Watchguard edge 1250e. I have the watchguard configured so I just need to make sure I have everything setup on the cisco side. At this point, there is no communication as I am not sur...
Greetings all,I am currently working with a vendor to get my ASA5520 setup to handle IPsec VPN connections for my clients and we are stumped with how to get the outside interface to respond to connections/requests.I work for a state agency and our ne...
We are in the process of upgrading our AD to 2008. So we are building a new Schema Master Grand Pooba AD server with a new IP address, the old address will be demoted. Unfortunately we have our AAA Server Group using radius to a...
Tring to add a new static nat rules, but it seems that i an not able to do that10.10.10.10 Public IP 20.20.20.20 inside LAN IPtrying to add:fw(config)# static (inside,outside) tcp 10.10.10.10 https 20.20.20.20 https netmask 255.255.255.255ERROR: map...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-27-2024 02:28 AM | ||
04-26-2024 05:58 AM | ||
04-25-2024 07:36 PM | ||
04-24-2024 01:26 AM | ||
04-19-2024 08:08 AM |
User | Count |
---|---|
6 | |
4 | |
1 | |
1 | |
1 |