VPN

We installed a peplink in routed mode in front of ASA. We can access all servers inside behind ASA after reconfiguring and all access outbound is working. Last thing is clientless sslvpn is failing. Sslvpn is still on 443 on ASA and management of pep...

Hello,I have a problem with a VPN site to site :access-list PROXY_ACL_VPN extended permit ip 10.0.0.0 255.255.255.0 192.168.0.0 255.255.0 My INSIDE network is 10.0.0.0/24The remote site is 192.168.0.0/24The problem is that I cannot route the remote s...

I want to remove a Cisco VPN 3002 Hardware client and replace it with a Cisco ASA 5505.  Is there a way to do this? I want to have the remote user and group authentication and no split tunneling.?  Thanks for your help.

Good morning!I have problems with a vpn configuration for point to point ipsec tunnel.Communication stops randomly, I have the ability to view any record or log of court?model cisco router on a 877

Hi,I have a customer that would like the iPad/iPhone any connect app. Is there a way of forcing a timeout of the VPN just for iPad/iPhone users without affecting the main policy for desktop users? For security reasons they want connections terminated...

Hello,I am trying to set remote access VPN from Windows 7 to ASA 8.4 . Requirement is to use native Windows VPN client, no additional VPN client has to be installed.Issue is that IKEv1 fails with message like "All proposals unacceptable". Client is b...

Hello,Sorry if this is posted in te wrong forum - not sure where to post it ...I am not that wellknown into AC-NAM, but I would like to know if this can be done.Is it possible to have a WiFi shutdown/closed when ever a wired connection is up ?The Sen...

Hi,my company is using the VPN client version 5.0.07.0290.The VPN connection is working on any Wireless Lan or Ethernet network but not in combination with a WWAN internet connection.After some research it seems to be that the VPN software doesn't su...

HI.I HAVE AN ISSUE WHEN I´M TRYING TO AUTHENTICATE MY IPHONE&BLACKBERRY DEVICE WITH ASA 5520 USING CERTIFICATES.IT SEEMS THAT CERTIFICATES ARE WORKING FINE, PASS THE IKE PHASE 1 BUT NEVER COMPLETE THE PHASE 2.WHEN I USE PRESHARED KEYS EVERYTHING WORK...

I have been struggling to come up with the proper config to do a NAT of an incoming VPN tunnel to a VLAN on my network that I hope either someone has done or can shed some light on.I have an ASA 5510 with an IPSEC site-to-site tunnel to a partner net...

Hi,I am in need to setup a VPN tunnel to a vendors hosted network for AD authentication.To prevent RFC1918 Address overlap we are trying to NAT into a VPN Transit Network.I was given 209.235.17.232/19 and need to NAT these addresses:209.235.17.233 <>...