Anyone at Cisco know when this will be release to the public? The last notice I was given was late-July and we are well past that.I need it especially for SHA-2 ESP hashing for IPSec site-to-site VPN's, a requirement by our regulators.
I'm trying to get a webvpn setup to run with two ASAs which are cascaded. Each ASA requires the user to login to webvpn. Practically, this means that you log in to the first ASA, which, upon successful login, should automatically divert you to the we...
the vpn client connection is successful but it can't ping the vpn server (router)... please help me figure out what's wrong...wan ip: 121.96.179.227/24router ip: 192.168.1.100/24vpn pool: 192.168.1-10/24please see the attached file for the full confi...
Is there a guide (for total beginners) on how to setup a both ends of an IPSEC VPN tunnel using a software client such as shrewsoft vpn and an 800 series router?I've tried following the instructions on cisco's site, but I don't really understand whic...
Two ASA's (local and remote). We want to authenticate client VPN's on remote ASA using LDAP on local net, through VPN tunne. Cannot seem to get traffic from the remote ASA to pass through the tunnel to local ASA. Hosts on both sites communicate fin...
HI Guys, I have created a VPN site to site tunnel between Pix and Router. I have pix in my control but router is under Client control. I have done everthing I need to do but I am getting errors . Please help on this.. When I run sh isakmp sa , I get ...
Hi,Quick question to check my theory....I have two KS's. I will be taking Secondary down for a few hours and I believe even though it has GM's registered, these hosts will not even notice Secondary down as the Primary sends re-key. Now if the GM fail...
I purchased my first VPN router and have very little background on setting them up. All of the documentation that I have read thus far suggests that this router can only be used with another Router. I need to deploy this router at a remote site and t...
Hi I am trying to setup VPN with WRVS4400N and Quick VPN on client side. I am fairly new to VPN and did some research and looked through the manual but can't seem to get it to work so far and from what I noticed many people are having this problem. S...
The company I work for uses a Cisco ASA 5510 router. We currently have an IPsec VPN set up and useres connect through the Ciso VPN client using group authentication, then they are prompted for a username and password, and use the same username/passwo...
We are in the porcess of creating an Easy VPN Server on a 3825 and deploying Cisco VPN Client 5.0.07.0290 32bit on XP machines and 64bit on WIn 7 64bit machines.Our first install of the client is on a Win 7 64bit machine.The client connects to the Ea...
Hi all,Site to site VPN is establish by Cisco 887 (PPPoE) on both site. The tunnel is UP.From staff PC (192.168.5.33) i can ping to 60.a.a.54.But I can't ping the inside interface (192.168.0.1).I need to access Server (192.169.0.150) from site B.how ...
We would like to enable our HelpDesk and Network team the ability to connect to Laptops using our ASA 5510 VPN device using Secure VNC application. Not sure if this is possible or how to enable this option.Any guidance is greatly appreciated.
Hi all,Syslog has been running fine for me. Just recently our syslog server isn't recieving logs from our ASAs. It started as sporadic and now I have not received any logs on syslog server since yesterday afternoon. The ASA is still logging fine, ...
Hi all,I have one Cisco ISR 2921 with VPN module. I'd like to be able to use it in order to "virtualice" independent instances for ipsec tunneling.What I need is something like Asa security contexts, but the problem with Asa contexts is that don't su...
