Hi all,I have ASA 5505 which is running Site to Site VPN and i use One Mbps Internet Connection. My question is " can i set fixed bandwidth for VPN and others for internet usage ??? "Thanks
I have problem bringing up a vpn L2L tunnel between a router and a VPN concentrator.It keeps coming up with the same message of MM_NO_STATE.I reded the ike policy on both sides and this didnt make a difference.I have also change the IPSEC policy on b...
Hi,we have a Cisco ASA 8.2(3) and several vpn client ipsec that connect to it ( 5.0.07.0290-k9 and 5.0.07.0410-k9).ExExactly after 4 hours the vpn connections of these clients are dropped even if the client is still sending traffic. I can't find any ...
ASA 5520 running 8.0.4ASDM v.6.1Need assistance understanding how in ASDM/Configuration/Site-to-Site VPN/Connection Profiles/ "Any Entry" I can specify that I only want to offer an IKE Proposal of pre-share-aes-256-sha?The IKE Proposal field has a nu...
Hi,I am supposed to configured an ASA 5510 for remote VPN connection but I am a beginner.I did the wizard from the ASDM.I did configure the VPN client (Cisco official client) and it connects to the ASA, but then the ping from the client toward the LA...
Hi all,We run a hub&spoke network with dual GRE tunnels from each spoke site to seperate independant adsl routers at the hub.IPsec is enabled on each tunnel with crypto maps and then QOS is enabled with pre-classify for voice traffic priority. We als...
HiI would appreciate if anyone could help me on this, I have the following setup:Internal network(branch)---->ASA5505 <------->BT ADSL(dynamic IP, NAT)<-------Internet------->ASA5510<----Internal network(HQ)We have created an easyvpn between the bran...
Hi All,I have setup AnyConnect on an ASA and after successful authentication from the client, no traffic passes from the firewall to the client. I only get packages sent, not recieved. The client is sucessfully getting an address from the local pool,...
Hi, this my three time that I post the same problem about authentication in VPN 3000 but until now I haven't had return on neither of the postmaybe those I'm more clear than others.go ahead....I have a VPN 3000 with PPTP Tunnel VPN and the first auth...
I have a remove access vpn configured on my ASA 5510 which works fine, VPN pool easily allocates IP to all remote used , but they have few network drivers shared on their machines & most of them are linked using the computer name rather than the IP w...
I tried the above scenario to test the vpn failover in these SA devices, the following are the configuration i have done :-The ports are configured as above.The optional port is configured as WAN port.In optional port ->WAN mode i have selected auto ...
HiI manage a VPN 300 concentrator which has been happily working for several years without any problems. All users are part of the same group and authenticate to an RSA server. We recently moved from RSA authentication manager 6.1 to RSA authenticati...
I am seting up an evaluation deployment of the Cisco ASA SSL VPN. Our intended use will be as Client (AnyConnect) Access for Employees and as Clientless Access for third parties (i.e. contractors, consultants, alumni, etc.). Both will use username/...
i am trying to configure a site to site vpn with a dynamic map, with ASA2 has the dhcp assigned on the outside interface. The underlying routing works fine. But when I applied the ASAs with my phase1 and phase2 configs. it stops working, not even pin...
