VPN

Hi all,A few questions relating to different VPN scenarios - basically i need to put together a solution that allows trusted company laptops full access to the internal network, an SSL VPN option for untrusted (e.g. internet cafe and home user) machi...

we have an ASA withsoftware version 8.2(1) and ASDM 6.2 to use the VPN.  we configure the anycoonet client with split tunnels for our vendors to access internal server and have access to the other resources in the web simultaneously.  Windows XP clie...

I have a setup with a pair off ASA5510 on the central site, and approx 20 sites with ASA5505.A couple off network are configured as site to site tunnels to every remote site.Its very stable, but the last year or so ocassionally one of the tunnels go ...

Hi!Somebody known is the ASA/K8(only DES encryption) support L2TP/IPSec VPN?I've configured like in this guide http://www.cisco.com/en/US/docs/security/asa/asa83/configuration/guide/l2tp_ips.html but found limitations (3DES required) only for iphone\...

I recently received a C1921 and am doing some lab testing. I am trying to apply some old configs from a 2811 but some commands are not working.The most annoying to start is the ipv6 address family in a vrf definition (multi-vrf/VRF-lite). There is no...

I've been intermittently experiencing the OS routing problem affecting default routes with RA clients using various ASA and IOS VPN services.  I've seen this with the introduction of Vista.  Been too busy with higher priority projects to properly add...

I've installed Cisco AnyConnect VPN Client 2.5.0217 - Application Error on a laptop using Windows XP Professional with Service Pack 3.  When I shut the laptop I get the following error message : vpnagent.exe - Aaplication Error The instruction at "0x...

I am moving an existing VPN tunnel from an 8.0(4) ASA to an 8.3(2) ASA appliance and the previous config will not translate over.In the existing tunnel I am using both Internal NATs to get to the other end of the tunnel and external NATs for the cust...

I imported a client's pcf file into Cisco VPN Client version 5.0.07.0290.  When I attempt to connect, it says, "Contacting the security gateway at x.x.x.x..." and eventually times out.Shouldn't it first prompt for username and password?  This is exac...

All,Thanks in advance for your help, got a quick vpn nat issue.When connected thru the VPN, I try to ping a resource on the private network and the respond is a public nat ip not the private IP. Any help would be appreciated.