VPN

I have been fighting with this for a few months.  I have read a dozen or so tutorials on creating an IPSec Site-to-Site VPN tunnel, but cannot seem to get it to work.I think the problem lies with one line, where, I would put "set security-association...

hello I have a 2811 router and my configuration it is really uncommon, I did not find any exampel around. I can establish vpn connection using Cisco VPN client but then not evena ping works after I am in VPN.The configuration is the following.I have ...

Hi all,I'm not able to telnet to cisco1841 on WAN interface...( Connection timed out; remote host not responding )telnet from inside network to LAN interface is fineI can ping the WAN interfaceport 23 appears to be closed ( nmap )Does anyone have an ...

In AD each user has 3 options for remote access (dial-in or vpn) access, no_access, and control access through remote policy.  The default is AD is the 3rd option which leaves that attribute in a null or empty state in LDAP.  In the ASA I see that it...

We are using a Cisco ASAI have a site to site VPN from our public ip address to the public IP address of a customer.I need users who use the Cisco VPN client to access our private network to be able to go back out over that VPN tunnel to access the p...

I've tried setting up a L2TP VPN connection between win7 and ASA 5510 but I get an error, The L2TP connection attempt failed because the security layer encountered a processing error during initial negotitations with the remote computer. Kindly sugge...

Hello, I setup a vpn with vpn client on a pix515, release 8.0.4. I want to authenticate users to a Microsoft LDAP. I have done this configuration: ldap attribute-map LDAP-MAP   map-name memberOf IETF-Radius-Class   map-value memberOf CN = Users, dc =...

With IOS 12.4 it work with!ip ssh rsa keypair-name myRSAKeyip scp server enable!but with IOS 15.1 it does not work. Because i want via ssh send a new config to router and it should ssh on after reboot.Please help me Thanks lot.

I currently have a 5505 from Cisco. I have to set up a site to site VPN to get connection withanother agency. I also have to NAT my outgoing traffic to a specific NAT. My situation is this, I have no clue in the world what I'm doing. I have tried the...

After much digging, I have come to the conclusion that the WRVS4400N is not compatible with either the native OS X Snow Leopard Cisco IPSec VPN client, or IPSecuritas (even though IPSecuritas even has a setup wizard for the particular model). Under f...

I have a Cisco 7206VXR.Private subnet (192.168.0.0/24) is included into vrf WiFi and is behind NAT.NAT for clients is working.But clients can connect to remote PPTP server. They get 619 error.L2TP/IPSec connections works, but PPTP doesn't.When I remo...