VPN

I am having some trouble with an 871w. Currently I have no firewall configured, I am using NAT. The router is connected to a residential cable modem. The issue I am having is that a client of mine is unable to connect to his work VPN from a PC behind...

After configuring a cisco 1841 for Vpn, when I try to connect I get this error in the client Vpn logs:316    21:37:50.175  02/17/10  Sev=Warning/3 IKE/0xE3000057The received HASH payload cannot be verified317    21:37:50.175  02/17/10  Sev=Warning/2 ...

My client is currently using the Cisco IPsec client with the Gina installed. In the coming months they will be migrating to the new AnyConnect client with the gina. I know its possible to have both clients installed on the same system, but is it poss...

We currently have a set of servers that are up and running at a Colo facility.  We are in the process of moving the operation to another Colo facility.  We currently have a site-to-site VPN between the old and the new Colos.    The firewalls in use a...

Hello,I'd like to configure a backup connection for our site-to-site VPN but everything I tried doesn't work so far.Here is what I tried:crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmaccrypto  map outside_map 20 ipsec-isakmpcrypto map ou...

I'm looking for a configuration to support both a site-to-site VPN and have the ability for a remote user access via the Cisco Client.  I tried this the other day and when I put in the site-to-site configuration on the router it did not allow the Cis...

Hi,I have configure the webvpn on ASA 5520 using ASDM version 5.2. It works perfect with local authentication but it is not working with Radius. The radius server test is OK on the aaa server configuration page. however, when I try to log in with web...

We are going to move the ASA to a different remote location.  Therefore, we need to change the IP address of outside interface since the IP address will be different.  Do I connect to the Console port and change the IP address of the Outside interfac...

Is it possible to create a site-to-site tunnel from a 7206 directly to a windows server 2003 box?  From what I can gather, the windows box runs IPSEC services & some of the config is identical (phase1, phase2, psk, source & destination).