Hi,whether cisco ASA will support DMVPN. The ASA should act as DMVPN HUB device...Please advice and also help with some refernce links...Thanks in advance...Prasad.K
I have a PIX with 6.3(4) and the VPN Client 5.0.06.0110. I can establish a tunnel, but can't pass traffic beyond the PIX to the network from the client. I can ping the inside of the PIX, so I believe that the tunnel is fine, but maybe the ACL's are...
Hi, all , heres is the issue and i cand find the solution.Well i have the tipic scenario o f a vpn, first were trying to make a VPN tunnel from a central site, to another point in colombia, we are using a Cisco 1801 (MPC8500) processor (revision 0x40...
Hi,I have implemented a NAC solution for Remote Users. The CAS appliance in configured in-band invirtual gateway mode.I have followed all the steps listed in http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a008074d641.sh...
SmartTunnel doesn't work in Mac. I have tried with any version of Macintosh and any web browser. The version of the ASA-5540 is 8.2. I know there is a bug about configure the smart tunnel with the IP address of the server instead of the name. Nothing...
I am new to ZBF, but because of some limitations in the classic IOS Firewall have been forced to attempt to implement it. I understand the basics of ZBF but am wondering of the implications to my DMVPN Tunnel Interfaces. Unless there is a functional ...
Hi Support,Getting strucked in configuration of redundant KS. Primary KS is working working fine in all GM's, but when trying to add the another key server in GM it show only one. Not showing beth key server IP in a single group. However Cisco refren...
First of all... this is a basic sanity check.Configuration consists of an ASA 5520 and Cisco IPSec Client; clients connecting from Internet. Since the VPN client tunnel terminate on the outside interface of my ASA, is the traffic associated with the...
Hi,We have a Zywall35 and have used until now a Zyxel VPN Client. For some reasons, we would like to use now a CISCO VPN Client. Are we are already using version 5.0.00.0340 for customers, the question is: what should be done on this CISCO Client in ...
Good Day,In Cisco PIX RA VPN, recently i have expanded the ip pool from 172.16.x.x/24 to 172.16.x.x/23 and changed the corresponding access-list and nat entries, after which few of the users reported that they were unable to connect internet and othe...
Hi Guys, We have an ASA5505 connected via Site-to-Site VPN, problem is the tunnel is disconnected at random time (intermittent), we have check the privacy settings (edes-sha1.. etc) for both sides and all are Ok.Except for the logs that showed up in ...
I know it is a simple command, but I have forgotten!How do keep a VPN tunnel permanently up? At the moment the tunnel closes after the period of 8 hours until remote site needs to access head office. This means head office has to ask someone to log i...
hello Experti need to ask you regarding GET vpn desgin .i know there is a KS server which used to encryption policies, such as interesting traffic, encryption protocols, security association, rekey timers, and so on, are centrally defined on the KS ...
I have a Site-to-Site VPN with the VPN's being terminated on ASA's at both the sides. Is it possible to apply QoS on the ASA, so that only 20% of the total VPN Bandwidth is used for SMTP traffic, while the rest of the total VPN Bandwidth is being use...
Hi, We have near about 40 branches & looking for the VPN connectivity over Internet to HO and DR site to access the servers. Being the financial institute security is concerned.So deliverable solution can be below :1) Configuring IPSec between Cisco ...
