VPN

Hello.Setting up a new asa with client access. Run though the wizard and i'm getting this error on the client end. Any ideas?61 17:05:36.222 09/03/09 Sev=Info/4 IKE/0x6300004BDiscarding IKE SA negotiation (I_Cookie=CA45F791256BF6E1 R_Cookie=5D5...

Hello freinds, Would like to know that.. Is Frequent Disconnection on any "established DSL connectivity" is possible due to MTU Values (Value Mismatch etc) by any reason.

Hello,I am trying to get an IPsec VPN established between a Cisco ASA 5505 and an Allied Telesys AR450s, but am encountering a strange issue.Currently I just have the two devices back to back.If I initiate the tunnel from the AR450s side, the tunnel ...

HI,in our network we created a remote VPN for remote access to our internal server through PIX 515Ecurrently i have created a group-policy with the name VPN300 and remote users are able to access but what happens they get full access to our internal ...

I have a requirement to find out how, if at all, the Cisco VPN Client can use an X.509 certificate to prove the validity of a VPN Concentrator. -Much like a web browser uses an SSL cert to prove that a given webserver is valid. Note that I do not n...

Hi everybodyI am building a L2L vpn between my HQ and a remote branch using cisco routers 851; in HQ when I apply the ACl "which is underneath", the HQ lost the internet connection. please is there any line in that ACL which can cause this?rle_intern...

I'm trying to establish a VPN connection between an (old) PIX501 running 6.3(5)and an ASA5550 (which i don't control). The PIX501 operates in vpnclient mode. I don't seem to get passed phase 1. I have a feeling it's because of NAT-T/NAT-D (see debug...

We have a 3845 router that peers 20 plus IPSEC VPN tunnels. One tunnel connects to a 3060 Concentrator. For some reason, the tunnel drops periodically.We have this config on our side:crypto isakmp policy 1 encr 3des hash md5 authentication pre-share ...

I have Cisco ASA 5520 and Cisco ASA 5510 box with IOS ver 8.0 on both boxes. Can I do a Active/Active or Active/standby failover between these two boxes?

Hello, trying to figure out a good design for connecting multiple partners to our network. I currently have allocated to the task one router and one ASA5510. Having problems with my initial design concept and am looking for guidance on a new one.Th...

Hello, all...I'm a VPN beginner interested in setting up a permanent VPN connection between two facilities. I have a 1720 router on one side. Would it be best to assume that a second 1720 router at the other end would provide the best result?Is it ...

Hi How can I grant my VPN client users to access Internet through VPN tunnel.I am not using proxy and I want them to use Inetrnet through the tunnelThanks

Have an interesting one I may need some assistance on.Have a remote branch site setup on VPN (using DMVPN configuration). The site can access the main headquarters networks just fine, but can't get internet access. I think it's because the VPN router...