VPN

hi all,remote access VPN is not working on ASA 5505 when I configured the outside interface of ASA as PPPoE.It works well when I configured the Outside Interface with static IP with the same LAN range of D-Link ADSL router.I port forwarded UDP port 4...

Hi,My Setup is site-2-site VPN with mix of GRE with IPSEC Tunnel and IPSEC Tunnel.Routing protocol is OSPFAll Sites are connecting to HQHQ to Site AHQ to Site B HQ to Site CHQ to Site D Some of the Tunnels are not stable, I suspect overlapping of net...

I have a tunnel vpn between a firewall pix 7.24 and a firewall nokia at other company.I managing the frewall pix and another company the firewall nokia.In the pix I have the following messages:with the command:sh crypto isakmp sa 1 IKE Peer...

Dear all,I have a PSTB user who is dialing to ras and IP assigned from the pool configured in local pool of /24 at LNSNow user have a requirement that IP should be allocated to him which he has configured statically on his pC (which is from pool of /...

I know this may seem stupid, but... I need help.I am trying to get a new 'HP Mini' installed for a test for my sales force... and I tried installing the Cisco VPN, only to receive an error telling me the minimum screen resolution of 800x600 wasn't av...

Does the "tunnel bandwidth" statement (not the regular "bandwidth" statement as applied to a tunnel) apply to mGRE tunnels?The only Cisco documentation I've seen regarding this statement has been in the context of RBSCP (Rate Based Satellite Control ...

All, I have numerous international sites with leased connections that are backed up via ISDN using Dialer Watch. I have noticed that after about a year, the dialer watch stops working. I have performed a "Debug ISDN Events" and cleared the IP route w...

Hi,In our Organisation ,having Cisco ASA 5520 for VPN and our client-version is 5.05.0290,Clientssystems are Vista 32bit SP1 and SP2.We are observed some issues While connecting VPN 1) unable to connect 2)Some times it connects but system will get ...

Hello,I have a site to site tunnel (ipsec) between a 1800 and 871, all is working well with the tunnel except when i try to ssh from one side linux box to the other side linux box, the ssh session hangs on me right after the prompt.I am also able to ...

Please tell me if there is a way for the user to change their own password once they login with the SSL VPN Client. I would like for my users to have to change their password after first login & after so many days. Is it possible for users to change ...

Hi,I'm trying to setup an easy VPN between Cisco ASA 5520 8.0(3)6 and Cisco 857 Router 12.4(15)T7 C850-ADVSECURITYK9-M.Firewall has permanent public IP configuration and it acts as easy vpn server and router doesn't have permanent public IP assigned ...

I have setup Cisco ASA for remote access VPN.Sometimes when I start Cisco VPN client, ASA does not respond and vpn client gets an error message. Last time it happened to me i decided to ping the firewall interface and it was responding. I tried to co...

Hi all, i was testing site to site vpn. My diagram is simple. I am testing it on GNS3 to observer traffic via wireshark. R1 is connected to R2 over Fa0/0. R1 has a loopback 20.0.0.1/8 and R2 loopback 30.0.0.1/8. Traffic needs to be encrypted when 20....