VPN

I get these two messages when I setup an IPSEC tunnel between two ASA 5540s with 3 or 4 router hops in between. I can't get the tunnel to come up or ping across the network. I was able to ping all hops before this. I saved the working config before I...

I had two ASA's connected via site-to-site VPN tunnel for several months now (and working) and now something has changed that doesn't allow any traffic from one end to the other. My end shows all zeroes on encaps an hundreds of thousands of decaps. ...

I recently setup the Clientless SSL and Anyconnect VPN. I currently have a pretty basic setup, if your a member of the AnyConnect AD group, you get the Anyconnect Client, if your not, you get the Clientless portal (all using the Dynamic Access Polic...

Hi there !I have two branches that, for while, will not be connected to the main office.But I have a CME in one and I have in main office an ASA5510 that is not being used (so I'll take it to the old branch).Is it possible to create a IPSec tunnel be...

Hi every one.im trying to run L2L vpn with ipsec tunnel between my pix and 3745 router.my problem is that tunnel goes up only when traffic flows from one direction.let me describe my senario.LAN1-->PIX<----->R3745<---LAN2!!!PIX!!!ethernet 1:connected...

Has anyone managed to get the new anyconnect to work on windows running in vmware, or know if cisco is working to resolve it, or at least know why they made it not work?

I need a work around - I have upgraded my ASA to support multiple contexts (two of my clients share infrastructure but maintain two separate ISP), now I dont have VPN for 40+ remote locations

Hi,Is it normal that in EZVPN NEM peers cannot ping each other? All hosts behind the VPN gateways can ping each other over the IPSec tunnel but I coudn't telnet or ssh from one gateway into another.Thanks for any suggestions.Remy

Customer has the same remote networks as some of my local networks. What is the best way to apply Nat accross the tunnel?I'm trying to figure out how to setup "Tunnel Nat" or Nat accross the tunnel.192.168.x.x, 172.16.1.x local192.168.x.x, 172.16....

Hi,I have established a IPSec tunnel between India and Brazil,(india)ASA <--> VPN Concentrator (Brazil)tunnel works 52 mins and then tears down,automatically it will renegotiate and form the tunnel after 8 mins...what could be the isse?

During installation of vpn client cisco version 5.0.00 i had an halt> in phase “ Installing Cisco System virtual adapter “ > i after stopped installation.> > I now can't reinstall cisco client> > looking my system log> > > <> service Cisco Syst...

Hi,I have a DMVPN + OSPF set up. There is some self-encrypted traffic like https and ssh, which I want to sent into GRE tunnel without encryption, since they are already encrypted. Is there any way I can implement this? For instance, sent all traffic...

Help, can anyone point me in the direction of good documentation regarding setting up a site to site VPN between a ASA running 8.04 and a cisco 877 routerI've been searching and not found anything 100% usefulThanks in advance