VPN

I have a single 3000-series concentrator. Due to various forces at work in my organization, I must authenticate some users on an RSA server, and some users on a seperate server running RADIUS. In short, I need to authenticate people in "group-A" on...

Good morning I writing you to know a URL where I will find Remote-Access VPN Configuration with CLI (Comman Line Interface)Now I'm reading this URL:http://www.cisco.com/en/US/docs/security/asa/asa71/getting_started/asa5500/quick/guide/rem_acc.htmlbut...

dear sir,i have a Cisco 6509 with FWSM configured using this group:firewall vlan-group 1 104,105,109,111-114now i want to creat a new VLAN in the switch (for example VLAN 200) and i want to add it to the mentioned group.so i think i must add this com...

I am facing probelm while establishing VPN between PIX & FortiGate.The VPN gets established & works for soemtime -- a couple of days & then teh connection suddenly drops.The VPN tunnel comes up only when the VPN tunnel is reset from the FortiGate end...

Hi there:A quick question about configuring a VPN Server on C871. Is it possible to set up a VPN using Dynamic IPs? The Box do get a new IP from the ISP every 24 hours. Is a VPN possible under these circumstances? Is DYNDNS helpful?Thank you!

Any one have some informationon confgured group limitation on vpn 3020? I noticed that I could not add anymore after reaching 200. However I do not see any documentation that states that. Any input is appreciated as always.Fadi

Cisco VPN client v 5.0.01.0600 stopped working after installing Vista SP1. I uninstalled the VPN software, and cannot get it to reinstall. The process is hung up on "Installing the Deterministic Network Enhancer". The process dne2000.exe also with...

Hi,Basically we have a tunnel between two sites (obviously).We are both on a network on the inside interfaces (there's is 10.20.x.x / 255.255.0.0 and ours is 172.16.0.0)The tunnel comes up fine. If he then tries to ping me it fails. I have added th...

A router is making an ipsec connection to two different routers over internet.Only a singe ip lets say 172.20.18.25 is allowed over vpnIs it possible to nat the ip to two different ips for each vpn

Using Cisco VPN Client version 5.0.02.0090-k9 with OS Vista Business SP1 Error "Secure VPN Connection terminated locally by the Client. Reason 414: Failed to establish a TCP connection." This only begin to happen (every try) after Vista Service Pack ...

We have a site to site vpn with a business partner. The VPN tunnel is up and we can ping both ways. Also we can telnet to the remote side for testing purposes. The issue is that our server can't send data to the remote server. We are sending ACSII an...

Sorry if this is in the wrong forum.Note that all connections work flawlessly when using copper connections.We are using a PIX 506E firewall for VPN connectivity. My test notebook works fine at our business with our wireless network (WPA w/Radius, T...

Hi All,Is there any command on ASA5505 to reserve an internal IP address to particular device (on the inside) using the device MAC..? Thank you in advance.MS