VPN

On PIX side I have network 192.168.3.0 which I don't want to see on the concentrator side (inside networks overlapping). PIX doesn't have available public IP addresses except his own outside interface public IP. How I should nat/pat 192.168.3.0 to Pi...

Just a quick question, I just got a whack of 1841s with the VPN AIM and I am upgrading code from advipservices to advsecurity and when i do the AIM light goes out upon reboot. It looks as if it still is working. Im just wondering if this is supposed ...

How do I allow VPN passthrough on my ASA 5505? I believe I need to allow at leaste ports 500 udp and 4500 udp and port 50 TCP??Can someone please give example of correct access-list needed.Thank you in advance.CEJ

hi everyone,having two ASA 5510 configured in active/standby failover, do i have to buy ssl vpn licences to both devices to extend capabilities? what if i change it to active/active? license in question is ASA5500-SSL-25=. thanks!peter

We have purchased a 5520 device and I have configured out of box, the interfaces, telnet, etc and run the vpn wizard for remote access. I have a laptop with verizon aircard and cisco client installed. I can make a secure connection and ping the win...

Hi,I have a Pix configured with 2 TunnelsIPsec Lan-to-Lan to 2 differents sitesI have 2 ACL. I want that when traffic 10.10.10.0 goes to 192.168.20.0 takes my first tunnel access-list 101 permit ip 10.10.10.0 255.255.255.0 192.168.20.0 255.255.255.0(...

Weird, when I bring this Pix and ASA online the tunnels won't come up until I actually "Ping" The outside WAN interfaces from either side and to make it even stranger.... I can't "PING" the inside Interfaces until I go into the PDM or ASDM and ping f...

Dear sir,The asa5510 firewall allows SSH through vpn into our network in US.But, HTTP access of some of our LAN servers though vpn tunnel is troubled.For PCs installed with Linux HTTP access times out.Where as it works fine for windows operating sys...

I have a cisco 1811 router. VPN server is configured for remote users who has got ip from pool 192.168.2.0/24.It is coming through FE0. I tried to terminate it at vlan1,Fe0 and loopback interface. But remote users only can ping vlan1 interface and ca...

We are connecting up end users with the Cisco VPN client to the concentrator. The end users are utilizing softphones for voice and everything is working fine until they call another softphone. They will be able to establish a call but are not able ...

Hi,I am trying to setup a IPSec VPN tunnel between Cisco 3030 concentrator and Nortel Contivity 5000.When both sides configured with /24 subnet mask in its respective network list / intresting traffic list the tunnel is build but there is no communic...

Hi guys,I've this strange issue when a few users dial in to the ASA 5505 from VPN client 5.0.2, all get the same MAC address. Thus, when the remote user trying to use their softphone, all registered to the same phone.The ASA is fairly new, and it co...

Hi,We have a site to site IPSec VPN tunnel with a PIX 535 at one end and an ASA on the other. We don't manage the ASA. A user reports that his Remote Desktop session from his PC behind the ASA hangs every couple of minutes. We captured traffic on ...

Hi Friend Few question about PKI1) what is PKI ?2) How to integrate with router 3) How they work between end to end?Please send me good PDF for the same.-Minu