A customer is having the same private network as my company does, but i have to build a vpn between those 2 networks.Our site has a ASA5510 and the customer has a PIX 515e. How should i do this ?Many thanks for helping me.Gerard Schurink
When configuring VPN client access on a cisco PIX using an IP Pool, how is the designated IP pool (eg 192.168.1.0) allowed access to the internal LAN (eg 10.101.1.0?Is this NAT'd by the PIX and allowed through? What routing is performed to allow this...
Hi,I have installed a cisco router 2801 (12.4) in my company's new branch. The primary link to HQ is a leased line 128 Kbps and there is an ISDN backup. Dialer watch has been configured as back solution. The primary link (leased line) is not ready f...
Hi I want to "add" "delete" lines in dynamic access-list by RSH from Linux.I can only delete lines from access-list,but when I add lines I receive message:"Line has invalid autocommand "access-template 105 test1 host 192.168.3.246 anyHere my script:-...
Im looking at creating a pre-configured install for the 4.8 client. This normally involves editing cab file contents?? I've been unable to locate a 'how 2' guide for this, does anyone have any ideas, has anyone tried this before, can it be done???
I've got a Cisco 1800 ISR with ADvIPServ running 12.4(11) IOS.The problem im having is with connecting a Remote users (on Windows XP) to the Easy VPN Server on this unit.I've configured the Ez-VPN Svr with basics and im using the name/groupname for a...
We are getting 8 mb of bandwidth through 4 e1s from a service provider. They have given us the following informationx.x.x.x My end IP addressx.x.x.x other end IP addressx.x.x.x Network addressx.x.x.x My end IP address x.x.x.x other end IP addressx.x....
Dear All,someone can tell me if is possible take control of the remote client connected by VPN, through application like Remote Desktop or NetSupport?We use a VPN Concentrator and one of our customer need to take control of the client-desktop that co...
I have configured IPSec remote access vpn and able to connect to internal LAN but when I get connected to vpn I am unable to browse internet at client. I have checked the dns server config under group policy and split tunnel settings but still the sa...
Hi!I've a 2610 Router with IOS 12.3(6a) [c2600-i-mz.123-6a.bin] connected to a 2520 Router with IOS 11.0(13) [igs-i-l.110-13]. I configured the routers to backup the connection w/ a telephone line but as son as the chat-script connects, the 2610 rout...
Hi,I have small office that is connected to the main office over a ipsec tunnel.On the main office lan I have a server that only accept traffic from the main office inside lan.Therefor I need to NAT incoming traffic from the ipsec tunnel with a new s...
Hi,I'm in need of some urgent help please.I have configured my VPN following this:http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800b07ed.shtmlBasically I'm NATting a whole subnet before sending it over the tunn...
Experts , Our ISP has provided with a sample configuration to setup a point to point Multilink T1 connection btw two office's. controller T1 0/0 framing esf clock source line primary linecode b8zs channel-group 0 timeslots 1-24 speed 64!controll...
hello,On cisco 3640 RAS I have a channel issue, users are deconneted intempesively.With the modem debug I have this message:Jan 7 09:25:15: CSM: MODEM_REPORT rcvd DEV_IDLE for call_id 0x14D, modemnot found due to wrong b channel number or b channel ...
