VPN

Hi,I use local authentication for the remote VPN access on an ASA. I want to know if it?s necessary to use a radius server for more security. Is there more security to use a radius server instead a local authentication?I'm new please help me.Regards,

Hi,We'd like to know how to disconnect Client VPN automatically when connected users do nothing during 5minutes.We've tried :group-policy Gr0 attributesvpn-idle-timeout 5user's always connected even if he does nothing.He gets no notification.Any hel...

Good morning,It was just brought to our attention that we have reached max sessions on the VPN 3015 concentrator (100 max sessions). I would like to swap this out with a VPN 3030 (1500 max sessions). But I have a couple of questions.1. Which entry...

Hi ,I have a site to site VPN and VPN clientsand for VPN traffic i got no nat and sysopt cpnnection permit-ipsec.I want to configure port based access-list for the vpn client for ssh access to one of my vpn clients to a machine onside my LAn network....

hello,I'm trying to configure my home cisco 2621xm to accept vpn connections. I've used many cisco pdf documents and they all same almost the same so I've done my configuration using these documents.now I just can't get past this error message I'm ge...

We have a VPN Concentrator 3005. One of the users is trying to connect to our network through wireless at a hotel. He was able to login through Cisco VPN client. However, he could not open Microsoft Outlook. Can you help? Thanks.Diane

We have an Cisco 837 ADSL router that connects to our Cisco Concentrator. The only way I can get the tunnel up is if a user turns there PC on that is plugged into the ethernet port on the back of the 837. If it's off and the router is rebooted the ...

I have 2 sites, each has ADSL static IP connection. At HQ, I use Cisco877-SEC-K9 and Cisco877-K9 at branch.I configured the Internet connection, then try to make a VPN tunnel between them for HQ-branch site-2-site connection, and teleworker (with Cis...

Hello,I am wondering if it is worth to buy additional memory for our 2811 routers. 2811 router comes with 256MB of memory and an embedded VPN moudule. We upgrade the IOS image to Advanced IP services in order to use L2TPv3.I believe that the 2811 rou...

Hi,I am new to firewalls,I have a PIX 515E with VPN on it.I want one of my VPN clients to ssh to an internal server.the VPN connection gets established and is fine.But when I open an SSH session it shows remote host down.I get the correct IP pool add...

Hello,as far I know, cisco vpn client's cert-manager doesn't support a simple enrollment/renewal of digital certificates.Is there anyone who knows a tool for client pc's like Entrust Intelligent Security Provider (too expensive). The user should can ...

Hi,I have done the following based on the documentation for the Cosco VPN 3000:-------------------------------------------------------------------------Tasks SummaryWhether you use SCEP or the manual method, you perform the following tasksto obtain a...

Hi We have 2 x 1721 router, C1700-IPBASE-M, Version 12.3 (13) RELEASE SOFTWARE fc. Are the above IPSEC capable? We would like VPN the above to main office, rather than point-point.Thanks.