VPN

Hi - This may be a common problem, I'm new to VPNs so please be kind!We have a small network with a server running SBS2003 Std with only a basic firewall - it does not run ISA server.The configuration is:-Internet <---> Router/Modem <---> External NI...

Hi,Please enlightened me on the correct configuration for my setup.I need to setup an IPsec VPN connecting to Verizon SIP PRoxy. My question is where should i configure my VPN Config in my Cisco Router. I need to connect our SIP Proxy with MCI. Below...

I tried to solve this for quite a while, but... No luck. Here's the current situation:Router that performs the dialing has an ISDN BRI card. This is 2621XM with IOS 12.3(6f). Hostname is RTBeograd.Access router has a PRI (E1) interface, and this is 3...

I have problem with softphone ,when am using ssl vpn (ASA).i got one way communication .Is there ant possible solution for solve the issue ? anybody facing the problem previously ?Am using nortel softphone.when am connect thro ssl vpn ,i can reached ...

I have this PIX501 box and this is what I want to do:Outside: connect it to a DSL modem (yahoo/ATT SpeedStream 5100). Use DHCPInside: connect to one or two PCs. Use static IP. The PIX box's inside IP: 192.168.1.1The Yahoo's DNS server IP: 192.168.0...

After a successful connection with Cisco VPN Client, can't communicate with the internal network if the client has the same subnet address as the internal network.My internal network 192.168.1.0/24VPN Pool 192.168.5.0/24Any client with a 192.168.1.0/...

Hi All;I have a vpn3002 concentrator that i'm trying to configure access to using group authentication. i created a digital ceertificate to be used by the group and created the SA and IKE proposals, however when i try to connect using the cisco clien...

Hi All,Can any one let me know hot to configure remote access vpn or SSL vpn on 2800 ADSL router with DYNDNS as I dont have static public IP, its dynamic IP so it gets change everytime.ThanksNK

What devices and softwares we need for setting up AAA for BRAS

I have 2 asa5520-bun-k9.I configure each asa as described in Cisco Security Appliance Command Line Configuration Guide, Version 7.2(2) chapter 36.But VPN Tunel dont created. No messages about VPN in logg. What i do wrong?Please help. Sorry for bad En...

Hi,we r going to configure and in headquarters we r using 2801 routers and in branch locations 1841 routers so we want to connect thorugh service provider can any one suggest me the complete plan how to connect as we have to establish connection betw...

I have a laptop experiencing intermittent connectivity problems to a Pix 501 w/6.3. The laptop is at a site with a firewall I don't control. The firewall's sysadmin indicates other outbound Cisco VPN connections are OK.The laptop in question connec...

Hi,I have installed a 3015 concentrator and configured caching for CRL but the CRL is larger than the CRL cache size on the 3015 (128KB). Users are authenticated and no CRL has been cached locally, obviously, it's size is around 750KB.My question is ...

i'm having a trouble with my PIX 515E. I followed the instruction below. I connect my laptop w/ crossover cable to the E1 or E0 of the Pix. I assigned 1.1.1.1 and the laptop to 1.1.1.2. But, I can't ping the the laptop from pix or vice versa. http:...