VPN

newbie question:what basic steps have to be taken to us a 1800 router to fire a vpn behind a pix 515e? Is it simply allowing access on the PIX?

Hi All,What's the difference between WebVPN and SSL VPN client PIX and ASA?what's the difference in function?Thank you!Best Regards,Teru Lei

i am running into problems trying to NAT incoming vpn connections. here are all the outputs that i think would show the problem. if you need more please askaccess-list vpn_nat extended permit ip 192.168.241.0 255.255.255.0 192.168.1.0 255.255.255.0 ...

I have a scenario as shown in the attachment "lifeline_routning.jpg". Two sites with several VLAN's is connected over a wireless bridge. The green VLAN is for administration of network devices. If the wireless bridge breakes down, I would like the Ci...

Hello all,i need to configure a vpn on my pix firewall, to connect remote users with vpn clients. I try to do from Vpn wizard at PDM but, did not succeed. what i have to know basically to do that?pix is 515Rthanks!

Hi guys,We are trying to setup a Site-to-site VPN using a Cisco Concentrator 3005 and a Linksys RV082. I am quite positive we are having a configuration problem but not entirely sure what is it. My biggest problem is how the RV082 divides everythin...

I've been trying to configure an L2TP VPN for our company remote employees to use VPN in hotels around the world as the Cisco VPN ports are often blocked. I've used Cisco's own L2TP examples, and examples from various forums. All have the same respon...

Is it possible to build IPSec tunnel with Cisco VPN Client and Linksys VPN router?

I have internet access, I have the right username and password, and I have added ports to the windows firewall both UDP and TCP/IP info and still I get Reason 403:Unable to contact security gateway.

Can anyone tell me if Cisco have resolved the issue with the VPN client integrated FW and Windows Vista. I have downloaded the beta version 5.0.0.90, but this doesnt work if I set my VPN policy requiring that the client use the IFW.I have clients co...

Hi,I've configured a multi-site VPN using SDM. I've attached the config for the central router. It's an 1801 running IOS 12.3. There are 877's in the remote offices.What I'd like to know is that whether it's possible to stop the VPN links being dropp...

Hi all, I have a very basic question.Can I use a firewall enabled IOS to simulate a PIX Firewall?ThanksReza

I have a Unix server on my internal network and when I VPN in to my office I can't connect to it. The Unix server has an IP address that's in the range of all my Windows 2003 servers but I can't ping it or connect to it. If I'm sitting in my office e...

Hi, We've recently started getting weird behaviour on PCs with the Cisco VPNClient installed on them. We'regetting Event Id 5003 TrueVector Service failures and strange behavioursuch as tn3270 sessions timing out / dropping and also ftp clients fre...