VPN

Hello, We are using cisco 7206VXR (IOS ver 12.3(10e)) for terminating PPPoE session and it handles up to 200 session. From last few days we are facing problem of frequent termination of pppoe session of the customer. When we check the logs of radius ...

I have create a VPN with the wizard and gets connected with no problem. after connection i can only ping my internal interface of ASA but nothing else which gives me no access to my network. I think its a policy or some security issue. Can anyone hel...

Hi i have 3 876 and i want to make a tunnel so i can have a vpn to my networks.. when i connect the 2 of them tunnel works but i don't have Internet to my second network! here's my startup-config..no service padservice timestamps debug uptimeservice ...

Home user needs to connect to Cisco VPNC via IPsec to access corporate network.At his home, user connected to service provider using ethernet and private addressing 192.168.6.0/24.To access an Internet, service provider requires user to establish PPT...

Hi Forum,I am building a GRE tunnel from my core switch through ASA firewall to destination site core switch:switchA <> ASA1 (Internet) ASA2 <> switchBI can ping the destination tunnel interface address, but i can't ping the tunnel destination. when ...

Does anyone know why and how to stop the Domain field being prompted when using the Cisco VPN client (version 4.8.00.0440) and Cisco VPN 3005 (Version 4.7.1).Seems that since it was configured to a Windows 2003 IAS and 'RADIUS with Password Expiry' w...

I need to determine the average U/L and D/L data during 1 days operation of a particular IPSec VPN tunnel that is terminating on a PIX 515 (other end is Draytek Vigor). When I look at the tunnel stats using the PDM, I see the number of packets encypt...

We have a 3005 VPN Concentrator terminating all of our remote access VPNs. One of the internal domain controllers went down which serves as DHCP/DNS servers for remote access VPN users. I changed the settings in numerous locations within the Conc...

I would like to do the setup according to the doc - http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a00800941c9.shtmlThe only disadvantage I see is from the following excerpt from the article - "Warning: Unprotected modems shoul...

When I try to connect to a Pix506e via VPN client I get the error message, "No private IP address was assigned by the peer."

HelloI cannot get 2 newly configured devices to establish a site-to-site VPN. They are an ASA running v7 (212.240.128.45) and a Pix 501 running v6.3 (10.71.135.4). Both devices are providing internet access fine. The 10 address on the Pix is translat...

Dear alli am facing a problem in my network, i am using RIP V1 as a routing protocol, also i ahve isdn backup, when the main link is down, and the isdn is up, no dynamic routes in the remote site, so i have to configure them static, so can you please...

Trying to get a Cisco VPN 3005 to authenticate users on a Windows 2003 IAS service with password Expiry.Have set up VPN 3005 and IAS using info linked below.http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a008...

please excuse me while i get my head around this thing.policy problem. very simple setup. getting: 2 Mar 16 2007 14:51:24 106006 xx.202.120.109 xx.129.14.162 Deny inbound UDP from xx.xx.120.109/500 to xx.xx.14.162/500 on interface outsideno web or h...