VPN

Hi everyone, I would like to configure SSL VPN on our VPN Concentrator. I have got this working with username/password combination however i would like to get this working using certificates. Preferably i would like the user to have a user certifi...

Hi,using the document "QoS Solutions for PPPoE and DSL Environments" as a reference I'm trying to implement Quality of Service for a DSL connection via the ATM interface on a 2821 router.So I apply the service-policy under ATM VC configuration mode (...

Can i use the 3845 as RAS if i installed the (accept calls) VWIC2-2MFT-T1/E12-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card - T1/E1or NM-1CE1T1-PRI 1-Port Channelized E1/T1/ISDN-PRI Network Moduleand what is the difference between the two Cards?

I tested a vpn client version 4.8 with my pix, it works. But I still confuse one thing is this version4.8 is a vpn concentrator client software or it is a general vpn software for every vpn devices? I notice in cisco document there are some different...

Has anyone been able to get these two to work together? The Verizon PC card utilizes a PPP interface, and when trying to establish a tunnel I get the unable to modify the forwarding table. It works fine over an ethernet interface. I am using 1.1.0...

Hi everyone, I am doing some testing with the SSL VPN Client and i seem to be having an issue. The first connection will work ok, launches the SSL VPN Client installation and connects without any issues. The issue i have got is that once i discon...

Hi,I work for a Managed Service Provider organisation and belong to the branch office solution group. I have very elementary knowledge about the branch office design aspect. I would like to know if we can automate the Standard design of a branch offi...

Hello all, I am sure I am close, but I am missing something. I have an ASA5510 that does client VPNs with radius authentication as well as 1 end for a VPN tunnel to a Pix 506. The client vpn works great, and there are no issues. The device tunnel ...

dear alli would like to be pointed to documents on the cisco web site, that interpret and explain all or the major output of debug commands related to ipsec and isakmp , thanks in advance

I have 3 sites(A,B,C). A is connected to B thro' Site2Site VPN & also B is connected to C thro' Site2Site VPN. All 3 sites use PIX 7.1(1) for VPN connetctions. If I trace C clients from A client, it is only one hop thro' B. Everything working fine so...

Hi;I have a VPN that is connected to a WAN Aggregator, i have multiple isp and one of the limitations is my upload speed. i get most of my sites to connect but there are a few that connect but don't pass data. the internal address on the aggregator...

in the peer model of VPN, whay using a shared router, we use ACL.do we use extanded ACL, and how it can be used to separate VPNs?can we permit access to Internet and deny it to other VPNs?

I have a functioning DMVPN environment running with two hubs and approx 95 remote offices using 2621XM VPN Bundles. They have been functioning well for quite a few years now. I am now trying to bring up a new office with a couple of differences, th...

Hello All, Can someone please help me in understanding how to configure Dial in VPN on the PIX Firewall's.RegardsDeepak

Hello,We have a 3015 VPN concentrator, and before, the users weren't able to connect for an hour and get at least 15 disconnects.We have upgraded the Concentrator, the secure desktop and the SSL VPN Client. Particular the VPN client solved a lot of t...