VPN

My VPN terminate on an inside IOS router (7204VXR) connected to local switched lan with a 10/100 Lan card in trunk mode.VPN trafic comes from outside accross pix inside interface (static nat and access list) mixed with inbound/outbound clear traficI ...

Dear All!I am setting up a vpn with two 831, only with pre shared key.my config looks like that:-----------------------crypto isakmp key geheim address x.x.0.2!!crypto ipsec transform-set SetEins esp-3des esp-md5-hmac crypto ipsec transform-set SICHE...

For my current installation I have 3 sites with aprox. 20 users at each site. Each site has a mix of wired and wireless users. I would like the wireless users to use VPN as one level of security. I would also like to be able to use site-to-site VPN o...

Hi,I have a scenario where I would need to set up failover using a 1720 router connecting to two different ISP'S and a Pix 501 behind it.How would the failover work, specially the configs that need to go on the pix so it knows how to get to the desti...

Hi,My customer have a firewall (matra) with 2 interfaces , and he wants to use a vpn 3002 to established a link to the main site.I don't know if it's possible, but he wants that the 2 interfaces of the vpn 3002 will be behind the firewall with the sa...

Hi,I´ve problems to start a VPN connectie to an Cisco Pix 515. Error 412.The client is Windows 98 se. The client starts an analog sessie to an ISP. When there is an connection to that ISP , they start te cisco vpn client.Then i get an error 412.I tri...

Hi dear I am running Version 4.1.3.Rel Apr 12 2004 04 with my VPN 3030. I have also configured Lan-to-Lan to the Pix 506. I am not able to see any logs on my vpn (Filterable Event Log) and i have configuredEvent Classes already. What am i doing wron...

Is there any good documents which explains the setup and configuration of site to client vpn in cisco pix using Microsoft CA? I searched in the cisco site and i could only find the document related to site to site configuration of vpn between cisco p...

Hi , I have just started to roll out 4.04 client to my users , we have not used cisco clients before I have had strange problems on some notebooks where all adapters vanished , an ipconfig all just returns a windows ip config and no adapters being di...

As my title described, just wanted to make sure if this is possible or not. I did try to put up a config like this, but the router is not negoticate any tunnel at all.any reply would be appreciate thanks

Making modulemake -C /lib/modules/2.6.4-54.5-default/build SUBDIRS=/home/jens/install/vpnclient modulesmake[1]: Entering directory `/usr/src/linux-2.6.4-54.5' CHK include/linux/version.h*** Warning: Overriding SUBDIRS on the command line can cau...

Hi - We have a VPN deployment as follows. 2 headend devices connected to the spokes via GRE w/IPSEC. The remove users behind the spoke IOS router can surf the web fine; however, intermitant problems (page can't be displayed error" when accessing int...

Hi,I have a PIX setup with two site to site VPNs and a remote access VPN using the Cisco Client. This works really well.However I have a requirement to connect to some customer sites using the VPN client. At present I have to dial the Internet and us...