VPN

If we have a T1 connection (1.54 Mbps)and put a firewall with 60 Mbps throughput for VPN, what would be the resulting effective speed of the connections? Would that be better than a VPN at 5Mbps?Do it change anything? And can someone indicate where I...

I am trying to set up a remote access vpn. vpn client dials in. VPN tunnel is established and i see it in the list of sessions. BUT counter for RX trafic increases but NOT for TX. What could be the problem ??

I have a user on another network in another office connecting to our office network via vpn client over dsl. Once the vpn client connects and establishes a connection, he gets disconnected from his own local network--can't access local servers, prin...

pix 6.3 remote access vpn w/vpn client 4.X. Any good confiuration examples to accomplish vpn.Thanks in advanced

Hi,Is anyone familiar with installing a vpn client on a MAC machine. When I download the utility and attempt to install it, it opens up as a text file (though it is not one). I am not in the least familiar with the MAC environment. Is there a procedu...

I have two VPN 3030 concentrators. Both devices are currently active and have multiple groups and users configured. I am looking for a way to easily migrate the users and group configurations from lets say concentrator B to concentrator A. End resu...

Hi All,Does anyone can confirm that the Intel Centrino chipset issue has no problem with VPN3000 client ??Here are the news regarding Centrino flaws:http://www.silicon.com/news/500018/1/4439.htmlRegards,Engel

We are using Cisco 3015 concentraors and 3.6 client on win2000 machines. Every so often we have tickets logged by users complaining of being disconneted while working on thier machines. The event logs in the 3015 are no help. The user can back on ...

I have been trying to get the RRI feature working on the VPN 3000 for a long time now and have tested this feature extensively.Although it works (either with OSPF using RRI OR Network Autodiscovery using RIP) and the VPN routes are injected into RIP ...

I've configured interactive hw authentication and individual user authentication. When the user at the remote site passed the individual user authentication, I'm able to ping the device from the concentrator end. However, this is not possible for d...

I get an error notice when trying to create connection. IKE phase1 goes OK but phase 2 gives error notice ' Received non-routine Notify message: Invalid ID info (18) '. Does someone know what can be wrong? I'am using 3DES - MD5 .

I recently purchased a second VPN 3005 Concentrator and was in the process of configuring it with my existing unit as a Virtual cluster. Upon setting this up, I realized that only the public interface is configured with a virtual IP address. My quest...

We have a number of remote PIX sites that we want to connect to a central site VPN concentrator. As the remote sites are not under our control some of them have overlapping addressing. Is it possible to NAT packets destined for the tunnel prior to en...

We manage de WAN for several customers. The branch offices are connected through a no secure network with GRE tunnels. The GRE tunnels are protected with IPSec. The tunnels are terminated on a Cisco 7206 VXR. Now I have to the integrated firewall bet...