VPN

Hi Guys. we are having one location in USA and one in India.We are taking a data link between these two lines and want to set up VPN Between the two. i m having 7206 Router and also 2621 router at both the sites.Can i use router to router VPN.Means c...

I have a PC wtih win95 OS and not OSR2.1.Can I install VPN Clinet in this PC ?2.Which version can I Install in this PC ?PS. Dos anyone has the VPN Client 3.0 for win9x ?

I know it is possible and I am real close to having this right. What I am trying to do is use cisco vpn client 4.0 to a router with 12.2.15.t. All of the example are using a network to network vpn not a client to network vpn. The l,clients are on d...

I use a 3662 router with IOS: c3660-ik9o3s-mz.122-15.T and vpn client 3.6.3 . the config is below :__________________________________________________________aaa new-model!!aaa authentication login userauthen localaaa authorization network groupauthor...

1- Pix 6.3(1) with 2 vpn site-to-site and client vpn on the outside internface.2- "no sysopt connection permit-ipsec" to better control traffic coming from 2 site-to-site tunnel with access-list on outside interface.3- vpn client with authentication ...

Hi, Everybody!This is what we have:W2k Workstations connect to our PIX 515 over the internet (Non-DSL connections ) with various versions (3.6-4.0) of Cisco VPN Client. WHILE being connected they need to use our internal MS ISA server. It's a key dif...

Hallo,Has anybody tried to configure the VPN concentrator version 4.0 with kerberos authentication to a Microsoft active directory domain controller?I think I passed the challenge to configure REALM correctly.But I never pass authentication because o...

Hi Guys.we are having one location in USA and one in India.We are taking a data link between these two lines and want to set up VPN Between the two. i m having 7206 Router and also 2621 router at both the sites.Can i use router to router VPN.Means ca...

We cannot connect to the corporate VPN 3005. From home, we now get the "Remote peer is no longer responding" message. BUT from home, I can telnet into the VPN without a problem as admin. Note: We had a major internet outage today and just now the T1 ...

Hi, I have a Cisco VPN client connection to a cisco 2600, if i'm using the client version 3.5.2, it's working, once i upgrade to 3.6.4, i can't even finish the negotication. does it has something to do with the AES issue?how can i get around this?Sim...

I recently upgraded my 515 PIX to version 6.3(1) and now I'm unable to see my local network when I connect from the VPN client (4.0.1). I am authenticating but when I check the client it says local area access disabled even though the box is checked....

I am using a 1751 router to create a VPN tunnel with a 3000 concentrator. Can you create the tunnel with DSL or does it have to be a Frame or higher. Is there anything to look out for when you are setting it up.

How many Simultaneous VPN tunnels does the PIX Firewall support without VPN Accelerator Card ???ThanksRegardsMohamed Abdallah