VPN

I have this cisco IP phone setup in my office, and client outside try to use this with cisco vpn client over the vpn tunnel to PIX. Outside client can never receive any packet from the PIX side, they can talk, but cannot hear anything. does anyone ha...

If you are using the Entrust Client with the VPN Client and set up the VPN to run at windows logon we have found that when you have logged onto windows, that Entrust has loggout out, on Windows 2000.Has anyone had this problem and know of a way round...

Hi everybody,is there a possibility to automatically reconnect a vpn tunnel after a PIX failover has occurred ?ThanksRobert

Hello, I have a 1720 router with a VPN module and a point to point VPN currently configured and working. I would like to config the router for a dynamic vpn connection using a pre-shared key. I have tried several things but nothing works. Debug comma...

We have a client with Cisco VPN client v 3.6.3 that can connect to a PIX 520 v 6.2(2), consistantly from the internet. On the client, after the successful connection of the VPN, we turn on a protocol analyzer and all of the frames from the client to ...

I have a VPN3030 concentrator and VPN client 3.6.2.b and they are connected through Internet but instable the internet connectivity.So I want to continue the end user’s application without any interruption even not working during unreachable the inte...

HI, Just want to find out, how do you define to use either tunnel mode or transport mode for a IPSEC tunnelany suggestion would be appreciate, thanks

I have a request from Fleet support users to open up UDP 500/10000 for IPSEC access from a Banks VPN Dialer Software (using Cisco VPN Client Software and SofToken II), to connect to this bank's VPN Concentrator. My question is is there a way I can...

I need to configure Site-to-site IPSec Tunnel beetwen PIX515 in the central site and IOS router on the remote site. The idea is to let remote site users access Internet only through IPSec tunnel to the central site and central site internet connectio...

I have a client set up and connects great to the VPN. Once my session is established I can ping the pc itself and the VPN public/private interfaces but nothing else. Nothing on the Network or out on the internet. I can't even ping the gateway or t...

is there a solution to back up a vpn connection with an isdn dialup connection. it often happens that the vpn-connection to some branches fail. as the link to the internet remains up a normal backup-dialer doesn't work. i would need a possibility to ...

I have a customer who has a Lynksys BEFSR41 router on a cable modem hookup. When his laptop is plugged directly into the router via the internal nic he is able to successfully use VPN Client 3.61. When he attempts to use wireless via an access point ...

I am setting up a vpn concentrator 3005 and am running into a bit of trouble getting radius authentication to work within groups. Where you add authentication methods such as radius, or edit the internal authentication, the test function of radius wo...

Hello-I am trying to configure an IPSec tunnul from my new home office ISDN (802) router to my corporate office 1701 router. This is my first attempt at ISDN config. Non-secured traffic over the ISDN connection works fine at this point; I can browse ...

I have a general question regarding IP Sec capabilities. Currently I am using a Cisco 1710 with FW features to implement a couple of IPSec tunnels to remote sites. Followed is a part of this configuration:!---------------crypto map test local-address...