VPN

Hi ALL, I studying DMVPN phase 3 and would like to ask if you can answer some of my question and issue that I'm working on right now.  Description: From the topology, I have 3 sites A, B and C and all routers are DMVPN configured. From the topology a...

Rolling out a 2110 on a FMC, both running 6.5 and followed this document: https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/214283-configure-anyconnect-ldap-mapping-on-fir.html And while can assign the FlexConfig policy to the unit a...

Hi everyone, We have configure a VPN site to site between or Cisco FPR-2120 in ASA to our Azure tenant.All good in our LAN, we can communicate with our server but we have a problem to allow Anyconnect client to communicate with the VPN site to SIte t...

We are planning to deploy the cisco umberlla roaming security client for remote Anyconnect user. We have 2 ASAASA1 : 5585 - SSP_10 Software version: 9.2.5ASA2 : 5510Software version: 8.2.5 As we checked on both software version "Anyconnect client pro...

Hi, we want to use OKTA as MFA authentication and I below what I did:Create an Authentication, Authorization, and Accounting (AAA) Server Group on the Cisco ASA using the ADSM management software.Create one AAA Server Profiles within the AAA group.Co...

Hi Team, We need your help to integrate the Cisco ASA 5585 firewall via SAML with G-Suite for any connect VPN to access local resource. We are currently using local database within firewall for user credentials, but are ready to move to SAML solution...

Hi,I have Cisco ASA site to site VPN running with customer hosted on AWS. ASA<--vpn--->AWS Customer is having issues with intermittent connectivity issues, when trying to do an SFTP connectivity over VPN.Saw below msgs from Cisco ASA syslog. The mess...

Hi All, I was building VPN firewall using two Cisco ASA 5516 boxes. I want to use single ISP shared between both ASA. I've chosen two Public IPs and configured on ASA units. I've picked another IP for VPN Load-Balancing. Does this support for S2S VPN...

Hi all, we run a AnyConnect configuration with splitt tunneling and split DNS is enabled and all works fine,but today we get a new VoIP application and this App wont be work with AnyConnect established connection.But let me start to explain our confi...

Hi, I setup a RA VPN using Cisco Firepower 2130 FTD 6.5.0 and AnyConnect client without split tunnels.I setup a NAT Rule and an access control policy to allow traffics.  When I connect to VPN Gateway I can access to internal LAN (RFC 1918) but I cann...

We are a small company and I have had a site to site VPN running a few few years. I needed to add another location, set up another site to site VPN which works fine. I can not seem to get the tunnel 1 and tunnel 2 to communicate with each other. Site...

Hi, I have been working on setting up VPN split tunnel with AnyConnect but cannot get it working. I want to allow users to print locally so wanted to exclude printing related traffic from the tunnel by creating an ACL and using "excludespecified" opt...

Hello, Here's my situation. ASA5525 9.2   Configured all requirements for webvpn and tested successfully. able to create new bookmark and enforce it by group policy first and for testing purposes after multiple attempts by apply DAP's (Dynamic access...