VPN

Hi,I ve a problem:I want to make a VPN remote access from VPN3000 soft. Client and a PIX.I've configured properly the pix and all works well. Now, if I want to deny that the clients can contact some services on some host on the inside PIX network, ho...

I've got a Win2K domain policy that requires periodic password changes. Users who connect through the concentrator are only notified when they open up Outlook since they don't start the client software until they login. However, once they change thei...

any one could advise me the VPN configuration within cisco 1720 with Cisco 3.02 vpn client.I manage to build up the tunnel but I can't ping to the internal network. please advise.

hellocan IPsec of a PIX work with ip sec of baynetworks router s(ARN, ASN,...)?over ip wan (LL, FR, X25,ISDN,...)does any one test it?

I've noticed that the Cisco VPN client will not co-exist with the Nortel VPN Client or the AT&T Net Client. Is there a reason for this? Is there a way to work around this if a vpn client other than cisco is needed on a particular laptop?Thanks.

Unfortunately I found a customer that after Cisco VPN client good installation blames that nobody else could reach his workstation via IP. I mean that his PC was not able anymore to receive IP Packet (PING, FTP and so on). He also enabled a Sniffer o...

VPN (IP SEC THROUGH INTERNET)I need to connect 27 sites with router to central site ,what do you recommended for the router to be used in remote sites and in the central ,in the central do we need one serial port for each remote site WHAT EXACTLY WE...

Hi,Can someone tell me how to set up an IPSEC connection btw. C803 ISDN DDR and a VPN3000 Concentrator ?Is there any possibility to set up the C803 acting as like an PC running VPN3000 client software w. ISDN Dialup ? (Tunnel address assignment for...

Want to setup a site-to-site VPN using a Microsoft ISA server on one end and a Cisco router on the other. Tried pure IPSec but failed and got some information at a discussion forum that Microsoft ISA does not support this setup.Understand the ISA ser...

I have a PIX 501 running 6.2(2) and PDM 2.0. It is connected to a cable modem (Comcast) and I have set up VPN for Cisco Client through PDM. I am using VPN Client 3.6 on a Win 2000 Professional machine to try to connect to the Pix 501. The client m...

I have a 2611 w/ VPN module. ethernet 0/0 conected to LAN and ethernet 0/1 connected to eth port on DSL router. I want to enable vpn connection to LAN for remote independant isp users. Does anyone have this configuration? Any thoughts or directio...

I am in the process of setting up 3 branch sites to one headend site with a Hub and Spoke design. All spoke sites will communicate with each other as well as Internet access through the Hub site via a 1721 router at the Hub. All VPNs will terminate...

Having a problem with a 3015 Concentrator. For some reason I can access the 3015 Concentrator through the Console with the admin username and password. But when I access through HTTP or Telnet, it's says my username/password is not correct. I was ...

What is the recommended latest vpn client for windows NT?

hi we are wondering if there is a solution to "route" VPN traffic between offices using only the "hub and spoke" VPN topology, for each nodes to VPN-communicate to each other, without relying on "mesh" VPN topology. In other words, when we will have ...