VPN

I am trying to connect with Microsoft VPN client to a Microsoft VPN Server behind a Cisco 802 DSL Router. I cannot get it to let me through. I can connect and receive a DHCP address from the VPN server, if I'm on the local network, so the VPN serve...

I've try setting up the pix 501 with the ezvpn to the 3005 but kept getting a no acceptable IKE SA on the concentrator. The samples shows the pix 501 with only vpnclient statements as show below: vpnclient vpngroup hwclient password <password> vpn...

How long does it take with withdraw routes that were installed as a result of a failed Easy VPN client session to a 3000 series concentrator? Is it advisable to use this route loss to trigger dial backup? This is being contemplated for a 1700 se...

Hi,I am using a Cisco pix 515 as my VPN gateway (instead of a concentrator) to which users connect using the cisco vpn client . The users authentication is being done with the help of a Windows 2000 IAS. In concentrator i could see the details of the...

Hi,the vpn concentrator is connected to Internet through the Speedstream ADSL router. This adsl router is doing NAPT. How should I configure IPsec in the 3005 to work through the NAPT device? I was thinking of using IPsec over UDP. Which ports should...

I have a CSPM with five IDSs and currently all IDSs reporting to CSPM. I want to send all IDSs log to current CSPM and to new server both. the new server(CSPM) are located in different organization and should connect though VPN. how can I add in cur...

I have a PIX setup to allow the locally connected network to get out through the PIX, for some reason my other internel routed subnets cant get out. )-;Any books, sites, tips, etc to help me get up to speed on the PIX?Thanks, Scott<-

I have a pix to vpn client configured. The pix has multiple dmz's, the problem is that my client cannot access all dmz's. I can access the inside network no problem, but when I try and ping a device directly connected to another interface I don't r...

I'm planning to put security on my network,my point is i want to use tacacs+ server to allow users to get into the network.at the moment the only information I have is that i must configure a router with some AAA commands that doesnt worry me,but on...

We use kix scripts on the network to map network drives . If I copy the kix app and script locally, it works great with the vpn client. I want users to be able to run the script without having to copy it locally (from the netlogon share). I do not w...

We have an issue where if our central site VPN concentrator goes down then all of our remote sites can't access the internet. I just want to know if this is another built in "feature" of the 3002 Hardware Client, and if it isn't then what do we need...

I have a VPN setup between a Hardware 3002 and the 3000 Concentrator. I also have a separate 1602 router at the same site as the 3002 which has a 56k leased line to the same site as the 3000 Concentrator which I want to use as a backup connection in ...

I'm trying to create an IPSec connection between a PIX and a VPN client on a windows machine. Unfortunately I could not make it work. Phase I does negotiate OK but the process gets stuck during the phase II negotiations. It seems that there is some k...

Do the PIX software versions need to be identical in order to setup a VPN between them. I have two PIX firewalls, one is at version 6.2 and the other isat version 5.(x).Also, how do you configure ssh on the pix. Is there documentation anywherefor thi...

Hi,I'm currently studying the possibility of deploying a Site-to-site VPN between a C3620 and a windows 2000 server. I tought that L2TP would be a good choise for encapsulating the pakages as it was developped by both companies. Unfortunaly, it doesn...