VPN

I have an ASA 5505 and a 5510 connected in an l2l vpn.I am unable to ping hosts from either side.I do have icmp allowed on both sides. Here is my config on the 5505:crypto map outside 10 match address XXXcrypto map outside 10 set peer xxx.xxx.xxx.xxx...

Hi,I'm attempting to write a LUA script to help fill in the blanks when Host Scan can't properly detect an AV or FW package.  This seems to happen with newer packages because of the delay getting the updated OPSWAT DLLs integrated with CSD.Below is a...

All,I have a 2900 that's terminating to the main site which has an ASA. The vpn tunnels work fine, but there's a change that we need to make. I was requested to configure nat on the branch router. The branch does some things over the web that are bus...

Hi,I would like to check on how it may be possible to perform ssl vpn using Cisco anyconnect for clients with multiple certificates installed. The setup is as follows:ASA1:asa1.abc.xyz.com (FQDN)ASA2:asa2.def.xyz.com (FQDN)A user has the follow certi...

Hi everybody,I'm having an issue after installing AnyConnect release 3.1.01578 on a Windows 7 SP1 system, it shows "any wireless network adapter available" also if it is correctly installed and working well.What's wrong ? Thanks Davide

Hello I have VPN tunel between cisco router and ASA. I have 5 ACL entries host to host and are exaclty same on both sides. VPN is working fine. After that I have added subnet on cisco router and customer added host to host on other side and we have m...

Hi netpros,The intended setup is for a Cisco ASA5520, sitting behind a internet facing router (cisco 3825), to terminate a IPSec VPN l2l tunnel.The static NAT from the ASA's private interface to a public IP address is performed by the 3825.Testing ha...

Hello all,I recently implemented Mi-Token as secondary authentication (Two-Factor Auth) for VPN users. I am trying to modify AnyConnect GUI Text and Messages. I want to change Second Password to PIN. Below is my modified text. #: 411b2339e3f785cb19af...

have a small company with ASA5505 8.3.2/ASDM 6.4 - they would like to access their server files remotely, etc - so VPN... (right?)(I went to school for networking but we just kinda flew through VPN configurations and specifics "because there are too ...

Hello All --Currently we have a allot of Cisco ASA5510 in production configured as remote access SSL VPN end points running software version 9.1.5, current latest release for this device.During our latest audit we found a vulnerability identified by ...

Hi guys, I have a problem with the following topology (just focus on R12 and ASR1K, SPOKE and HUB) R12 (spoke) has two tricks: 1) Dynamic IP on WAN interface (to the HUB), given by a Internet Service Provider2) port forwarding is needed on port udp 5...

Hi, Is it possible to enroll my cisco device with my Linux CA server, I know I can create my IOS device as CA server but we want to use Linux server only.  Thanks in advance...