VPN

Hi All,I have the below setup as per below:Scenario Question 1)Internal network(10.x.3.209 /26) - (10.x.3.192 /26)FW(10.x.3.33 /27) - (Inside: 10.x.3.36 /27) ASA (Outside: 10.x.3.148 /28)- (10.x.3.145)FW - INTERNET RTR (Static NAT)(60.x.x.61) - ISP -...

As there is no "ip radius source-interface" alternative on the ASA, how can Radius traffic, that is generated by ASA, be marked interesting, given that IPSec tunnel is dynamic and outside interface IP address is not known in advance?  

Have a CISCO 891 router. VPN has been configured by previous tech, but did not document VPN credentials. How would you find this on the device? Can GUI access be enabled?Thanks, Brian

Hi Guys, We've been getting a lot of tickets  submitted by users stating while VPN'd, their client just randomly disconnects.  Some would walk away and comeback after 10-20 minutes and it's unresponsive; It'll show connected but can not open any reso...

We use three CISCO 1921 integrated routers at three sites, each 1921 has global IP address, and is located in three different countries respectively.One of them is in the center site and the other two are in satellite sites, and two VPN connections a...

I have two 871 routers connected using a VPN tunnel.  The tunnel is up, however, when I do a standard ping from a windows desktop on one lan to a host on the remote lan about 50% of the packets are dropped.  If I increase the ping packet size to grea...

Can I use the NAC settings on the ASA to check anit-virus and / or windows updates for a client? If so are there any docs that give limitations, compatability and setup instructions?Brent

Once you connected to VPN thru Anyconnect Client, you will see that Virtual Miniport Adapter gets activated : any idea why we get the same MAC address for any user who install & use the client?---------------------------------------------------------...

Hi there, I could establish a connection to the ASA via Any Connect on the outside interface. Trying to ping a Client in an internal Network failed though.Can anyone tell me what configurations need to be made to get this running.- Cisco ASA 5505 fir...