VPN

Hi,  I have ASA5505 , connected to the WAN on port 0 (called Vlan2), and connected to my development LAN on port 7 (Called Vlan1).I want to add DMZ, and I connected switch and servers to port 3, and called it Vlan3. this is my settings:interface Vlan...

Hi all, one of our customer is running the above AC version and hitting the above error.form the DART file I gathered the following informationDescription : Server certificate validation failed with the following errors:Certificate does not match the...

 Hi everyone, We have 3rd PArty Vendor at our site and he is connecting to his company network via our Internet ASA?IT uses Nortel VPN client to connect to his office network  on port 10001 and 500.He can connect fine and access all the resources. Is...

We have AD authentication working well for user authentication of AnyConnect sessions.  We now need to restrict AnyConnect access to ONLY machines registered in AD.  I'm not having any success with this.  What's the best way to do this?

Hello everyone,we have a problem to set up a SSL VPN Gateway with a Cisco 881 Router.After connecting via SSL to the gateway address, a blank page is displayed Config-File: http://pastebin.com/ujsUZG9HIOS-Version: 15.1 UniversalK9 Can anybody help us...

Hi there!I have been trying to configure remote access VPN using digital certificates for authentication on some routers using IOS. What I want to do is authenticate the user based on the email in the subject in the certificate. The situation is as f...

Hi All,I have the below setup as per below:Scenario Question 1)Internal network(10.x.3.209 /26) - (10.x.3.192 /26)FW(10.x.3.33 /27) - (Inside: 10.x.3.36 /27) ASA (Outside: 10.x.3.148 /28)- (10.x.3.145)FW - INTERNET RTR (Static NAT)(60.x.x.61) - ISP -...

As there is no "ip radius source-interface" alternative on the ASA, how can Radius traffic, that is generated by ASA, be marked interesting, given that IPSec tunnel is dynamic and outside interface IP address is not known in advance?  

Have a CISCO 891 router. VPN has been configured by previous tech, but did not document VPN credentials. How would you find this on the device? Can GUI access be enabled?Thanks, Brian

Hi Guys, We've been getting a lot of tickets  submitted by users stating while VPN'd, their client just randomly disconnects.  Some would walk away and comeback after 10-20 minutes and it's unresponsive; It'll show connected but can not open any reso...

We use three CISCO 1921 integrated routers at three sites, each 1921 has global IP address, and is located in three different countries respectively.One of them is in the center site and the other two are in satellite sites, and two VPN connections a...