Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Begining stages of planning a dmz on ASA 5520

Hello all,

Can someone direct me to some good documentation for planning and creating a dmz on an ASA 5520? Any advice or suggestions are greatly welcome.

TIA,

Gary

2 ACCEPTED SOLUTIONS

Accepted Solutions
Community Member

Re: Begining stages of planning a dmz on ASA 5520

Hi Gary

Have a look at the following link,

http://www.cisco.com/en/US/products/ps6120/products_getting_started_guide_chapter09186a00805e2922.html

Hope this helps.

Regards MJ

Community Member

Re: Begining stages of planning a dmz on ASA 5520

Gary,

You should also check out this doc. It provides several sample configurations that involve a DMZ.

PIX/ASA 7.x: Enable Communication Between Interfaces

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807fc191.shtml

Thanks,

Matt

3 REPLIES
Community Member

Re: Begining stages of planning a dmz on ASA 5520

Hi Gary

Have a look at the following link,

http://www.cisco.com/en/US/products/ps6120/products_getting_started_guide_chapter09186a00805e2922.html

Hope this helps.

Regards MJ

Community Member

Re: Begining stages of planning a dmz on ASA 5520

Cannot express how helpful you guys are! Gary

Community Member

Re: Begining stages of planning a dmz on ASA 5520

Gary,

You should also check out this doc. It provides several sample configurations that involve a DMZ.

PIX/ASA 7.x: Enable Communication Between Interfaces

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807fc191.shtml

Thanks,

Matt

248
Views
0
Helpful
3
Replies
CreatePlease to create content