Customer is looking to test EZVPN in lab with 5505 head end and 3 or 4 5505 remotes. They will be doing less than 10 sessions. If they roll to production, they will use a pair of 5520s for the head end. While I believe all this should work fine, they asked if the work up the configuration in the lab on the 5505, can that be copied and then uploaded and used on the 5520?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...